Toshiba 27HL95 User Manual - Page 20

Connecting a digital audio system

Page 20 highlights

Chapter 2: Connecting your TV Connecting a digital audio system The TV's DIGITAL AUDIO OUT terminal outputs a Dolby Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system with optical audio input. You will need: one optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "minioptical" connector.) To control the audio: Turn on the TV and the digital audio device. Press MENU on the TV's remote control and open the Audio menu. Highlight Audio Setup and press ENTER. In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (see "Selecting the optical audio output format" on page 72). Audio Audio Settings Advanced Audio Settings Audio Setup Audio Setup MTS Language Optical Output Format Reset Stereo English Dolby Digital Done Dolby Digital decoder or other digital audio system LINE IN LR Optical Audio IN TV lower back panel Note: • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. • The DIGITAL AUDIO OUT terminal outputs signals only when receiving digital broadcasts. 20 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. #01E_012-022_27HL95 20 Black (E) 27HL95 *Web 213 : 276 05.9.12, 15:33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

20
Chapter 2: Connecting your TV
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
Connecting a digital audio system
The TV
s DIGITAL AUDIO OUT terminal outputs a Dolby
Digital
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby Digital
decoder or other external audio system with optical audio input.
You will need:
²
one optical audio cable (Use an optical audio cable that has
the larger
TosLink
connector and not the smaller
mini-
optical
connector.)
To control the audio:
Turn on the TV and the digital audio device.
Press MENU on the TV
s remote control and open the Audio
menu.
Highlight Audio Setup and press ENTER.
In the Optical Output Format field, select either Dolby Digital
or PCM, depending on your
device (see
Selecting the
optical audio output format
on page 72).
Audio Setup
MTS
Stereo
Language
English
Reset
Done
Optical Output Format
Dolby Digital
TV lower back panel
Dolby Digital decoder or
other digital audio system
Note:
Some audio systems may not be compatible with Dolby Digital bitstream
signals. Older audio systems that are not compatible with standard
optical out signals may not work properly, creating a high noise level that
may damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
The DIGITAL AUDIO OUT terminal may not output some digital audio
sources because of copy restrictions.
The DIGITAL AUDIO OUT terminal outputs signals only when receiving
digital broadcasts.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
LINE IN
Optical
Audio IN
L
R
#01E_012-022_27HL95
05.9.12, 15:33
20
Black