Toshiba 27HL95 User Manual - Page 66
Using CableClear, DNR digital noise, reduction, Selecting the color temperature
View all Toshiba 27HL95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 8: Using the TV's features Adjusting the picture (continued) Using CableClear® /DNR (digital noise reduction) The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To select CableClear/DNR preferences: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. 3. Press z to highlight the CableClear/DNR field, and then press x • to make a selection. Video Picture Settings Advanced Picture Settings Theater Settings Advanced Picture Settings Dynamic Contrast MPEG Noise Reduction CableClear Color Temperature Back Lighting 100 Reset On Low Auto Cool Done ANT 1 Note: • For the current inputs Antenna, Video 1,or Video 2, the menu will display the text "CableClear." If the signal is analog, the available selections are Off, Low, Middle, High, and Auto. If the signal is digital, the menu will display the text "CableClear" and will be "grayed out" with "Off" selected. • For the current inputs ColorStream HD or HDMI, the menu will display the text "DNR." If the video resolution is 480i, the available selections are Off, Low, Middle, High, and Auto. If the video resolution is 1080i, the available selections are Off, Low, and High. If the video resolution is anything other than 480i or 1080i, the menu will display the text "DNR" and will be "grayed out" with "Off" selected. 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below. Mode Cool Medium Warm Picture Quality blueish neutral reddish To select the color temperature: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. Video Picture Settings 3. Press z to highlight the Color Temperature Advancedd PPiiccttuurreeSSeettitninggss Theater Settings field, and then press x • to select the mode you prefer (Cool, Medium, or Warm). Advanced Picture Settings Dynamic Contrast MPEG Noise Reduction CableClear Color Temperature Back Lighting 100 Reset On Low Auto Cool Done ANT 1 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu. 66 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. #01E_065-072_27HL95 66 Black (E) 27HL95 *Web 213 : 276 05.9.12, 15:44