Toshiba 27HL95 User Manual - Page 60

Chapter 8: Using the TV's features Tuning channels (continued) Tuning your favorite channels To tune to the channels you programmed as Favorite Channels, see page 38. Tuning to the next programmed channel To tune to the next programmed channel: Press CH yz on the remote control or TV top panel. Note: • This feature will not work unless you program channels into the TV's channel memory (see page 36). • If you are recording a digital channel, you will only be able to change analog channels while the recording is in progress. If you are recording an analog channel, you will only be able to change digital channels while the recording is in progress. This is because the TV tuner that is being recorded (digital or analog) will be locked on the channel that is currently recording. Tuning to a specific channel (programmed or unprogrammed) Tuning analog channels: Press the Channel Number buttons (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5. Tuning digital channels: Press the Channel Number buttons (0-9) on the remote control, followed by the - (dash) button and then the subchannel number. For example, to select digital channel 125-1, press 1, 2, 5, -, 1. Note: If a digital channel is not programmed-either through the automatic channel scan (page 36) or the channel add/ delete function (page 37)-you will have to tune the RF channel using the Channel Number and Dash buttons on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1. Select the first channel you want to view. 2. Select a second channel using the Channel Number buttons (and the dash (-) button if selecting a digital channel). 3. Press RTN on the remote control. The previous channel will display. Each time you press RTN, the TV will switch back and forth between the last two channels that were selected. Note: • If you press RTN from a non-antenna input, the TV will return to the last-viewed ANT input and channel. • If you are currently recording a program, this feature will not be available. Switching between two channels using SurfLock™ The SurfLock™ feature temporarily "memorizes" one channel in the RTN button, so you can return to that channel quickly from any other channel by pressing RTN. To memorize a channel in the RTN button: 1. Select the channel you want to program into the RTN button. 2. Press and hold RTN for about 2 seconds until the message "Channel Memorized" appears on the screen. The channel has been programmed into the RTN button. 3. You can then change channels repeatedly, and when you press RTN, the memorized channel will be selected. Press RTN. The memorized channel will be selected. The TV will return to the memorized channel one time only. Once you press RTN and then change channels again, the RTN button memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that were selected. Channel Numbers - (dash) RTN 60 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. #01E_056-064_27HL95 60 Black (E) 27HL95 *Web 213 : 276 05.9.12, 15:42 CH yz