Toshiba 27HL95 User Manual - Page 26
Using the remote control to operate a cable, converter box, satellite receiver, VCR, DVD player, or
View all Toshiba 27HL95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 3: Using the remote control Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box) If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 24 and 25. To use your TV remote control to operate a: • Cable converter box or satellite receiver, set the Device Switch to CBL/SAT. • VCR, set the Device Switch to VCR. • DVD player or HTIB, set the Device Switch to DVD. Point the remote control directly at the device. Note: Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device's original remote control. POWER Turns the selected device on and off. +10 Press to directly access DVD chapters higher than 10. DVD MENU Accesses DVD menus. ENTER Required by some VCRs and cable converter boxes to change the channel. CLEAR Press to reset the title and chapter number. Device Switch Set to "TV" to control the TV; "CBL/SAT" to control a cable converter box or satellite receiver; "VCR" to control a VCR; "DVD" to control a DVD player or HTIB. REW Rewinds the tape or DVD. (Press during play mode to view the picture moving rapidly backward.) TV/VCR To view one program while recording another, press to select TV mode. SKIP Skips back to beginning of current DVD chapter or locates previous chapters. REC Starts tape recording. SKIP Skips forward to locate later DVD chapters. Channel Numbers (0-9) Press to directly access channels (as opposed to CH y z). TOP MENU Accesses a DVD's top menu. y z x • Press to navigate DVD menus (may not work on some DVD players). TV GUIDE Opens the TV Guide On Screen®. CH y z y selects the next higher channel; z selects the next lower channel. (for channels programmed into memory only) FF Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.) PLAY Begins playback of a tape or DVD. STOP Stops the tape or DVD. PAUSE Press during play or record mode to pause the picture; press again to restart. 26 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. #01E_023-028_27HL95 26 Black (E) 27HL95 *Web 213 : 276 05.9.12, 15:34