Uniden BC235XLT English Owners Manual - Page 53
Programming a Hybrid System, Fleet Map Size
View all Uniden BC235XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
6. Press D. 7. Use) or( to select the size code for the first block. BANK 1 2 3 4 5 6 7 8 9 10 TRUNK 8. Press E. The next available block displays. BANK 1 2 3 4 5 6 7 8 9 10 TRUNK 9. Repeat Steps 7 and 8 until you have selected a size code for each block. For specifics about each size code, see Fleet Map Size Codes in the Appendix. 10. Press R. The scanner exits the Trunking Programming mode, acquires the data channel, and begins searching using the map you've programmed. Programming a Hybrid System A Hybrid system is simply a Type I system with some blocks designated as Type II blocks. To program a Hybrid system, follow the steps listed in Programming a Fleet Map in the previous section. However, if you want a block to be Type II, select Size Code S-0. When you begin searching a trunking bank with a Hybrid Fleet Map, you will see both types of system IDs. That is, Type II IDs usually appear as an even number without a dash; Type I IDs appear as a three or four digit number, followed by a hyphen, followed by a one or two digit number. See page 61 for more information. 53