Uniden UDS655 English Owner's Manual - Page 13

Getting To Know Your Camera, Basic Operation Rules - pairing

Page 13 highlights

Getting to Know Your Camera 1 2 3 4 5 6 11 8 9 10 1. Antenna 5. Link LED (Green) 2. Light Level Sensor 6. IR LED (25) 3. Power LED (Red) 7. Camera Stand 4. Camera Lens 8. Pairing Key 9. Power Jack 10. Microphone 11. Power Adaptor Basic Operation Rules •• The Pairing LED on the camera will blink once to indicate pairing process has begun and then remain solid to indicate pairing success and data transmission is in progress. •• The UDS655 will return to QUAD mode from any screen after the monitor is idle for two minutes. •• The UDS655 cannot begin recording if the memory card is not inserted. •• After recording begins, it cannot be stopped within the first 15 seconds. Refer to Recorder Setup, page 22, for details. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

13
GETTING TO KNOW YOUR CAMERA
11
10
1
8
9
2
3
4
5
6
1.
Antenna
5.
Link LED (Green)
9.
Power Jack
2.
Light Level Sensor
6.
IR LED (25)
10.
Microphone
3.
Power LED (Red)
7.
Camera Stand
11.
Power Adaptor
4.
Camera Lens
8.
Pairing Key
BASIC OPERATION RULES
The Pairing LED on the camera will blink once to indicate pairing process has begun and then
remain solid to indicate pairing success and data transmission is in progress.
The UDS655 will return to QUAD mode from any screen after the monitor is idle for two minutes.
The UDS655 cannot begin recording if the memory card is not inserted.
After recording begins, it cannot be stopped within the first 15 seconds.
Refer to
RECORDER
SETUP
, page 22, for details.