Uniden UDS655 English Owner's Manual - Page 14
Using Your Uds655 - specifications
View all Uniden UDS655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
•• The UDS655 can record in QUAD mode (all 4 channels recorded simultaneously), with each channel in 320 x 240 resolution. If only one camera is turned on (Camera Setup), then the UDS655 records that camera in full screen (640 x 480). •• Press and hold power for 1 second to turn on the system. •• Press and hold power for 2 seconds to turn off the system. Using your UDS655 To... Change from quad view to single view (or back) Manually start recording Set up to record automatically Manually stop/cancel recording in Manual or Motion mode Manually cancel a Scheduled Record (either future recording or currently recording) Do This With the screen in quad view, press CH+ or CH- to cycle your cameras in full view mode. Once all cameras have displayed, the next press takes you back to quad mode. Press REC/DEL button. Refer to Recorder Setup, page 22, for details. Refer to Recorder Setup, page 22, for details. Press REC/DEL. Because this recording block has been pre-set to record for a specific amount of time, you must reset that recording block from Schedule to Manual or Motion Detect. Press REC/DEL after the recording has been going for 15 seconds and quickly (within 5 seconds) press M. The main menu displays. Go to Recorder Setup/Record Schedule and press M. Select X : MANUAL and press M again. Navigate to the block containing the recording in progress' time frame. Press M until X : MANual is selected. Press ESC to back out of the screens. Refer to Recorder Setup, page 22, for details. 14