Home » ViewSonic Manuals » Projectors » ViewSonic PJ1173 » Manual Viewer

ViewSonic PJ1173 PJ1173 User Guide, English

ViewSonic PJ1173 - XGA LCD Projector Manual

UPC - 766907299014

View all ViewSonic PJ1173 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ1173 manual content summary:

ViewSonic PJ1173 | PJ1173 User Guide, English - Page 1
ViewSonic® PJ1173 LCD Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 2
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference waste, but use the return and collection systems according to local law. ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 3
guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the obsolete Refer all servicing to qualified service personnel. Servicing is required when ViewSonic ii PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 4
noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 5
print the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ1173 ViewSonic LCD Projector VS12109 PJ1173_UG_ENG Rev. 1A 11-22-07 The lamp in this product contains mercury. Please dispose of in
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 6
Projector PJ1173 User's Manual (detailed) - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 7
. . . . 20 Auto on, Auto off, Lamp time, Adjusting the lens shift 20 Filter time, My button, Service, Using the automatic adjustment feature. . . 20 Security Adjusting the position 21 NETWORK Menu 56 Correcting the keystone distortions. . . 21 Setup, Projector name, e-shot, ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 8
Control 85 Projector Status 88 Network Restart 89 Logoff 89 E-mail Alerts 90 Projector Management using SNMP. 92 Event Scheduling 93 e-SHOT (Still Image Transfer) Display. . 96 Command Control via the Network. . 98 Maintenance 103 Lamp 103 Air filter 105 ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 9
the lens cover, please fasten the lens cover to the projector using the included strap. Strap hole 1. Fix the strap to the strap hole of the lens cover. 2. Put one side of the strap into the groove on the rivet. Bottom 3. Push the rivet into the rivet hole. Rivet hole ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 10
the projector may drop down. CAUTION ►Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or plug up the vents. Do not place anything that can stick or be sucked to the vents, around the intake vents. Clean the air filter periodically. ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 11
(3) (16) AUDIO IN4 (R/L) ports (17) RGB OUT port (18) AUDIO OUT port (19) REMOTE CONTROL port (20) LAN port (21) USB port CAUTION ►Do not use the security bar and the security slot to prevent the projector from falling down, since it is not designed for it. ►Use the shutdown switch only when
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 12
MUTE SEARCH (27) (21) (23) (29) (24) (10) (18) (5) (6) (9) (19) Back of the remote control WARNING ►Do not look into the beam outlet and point the beam at people and pets while pressing the LASER button, since the . Use the laser pointer (31) only for pointing on the screen. ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 13
. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 14
lens shift is set full upward. On a horizontal surface (b) (a) (c) up (c) down Suspended from the ceiling (c) down (a) (c) up (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with ViewSonic -15 (-6) 450 (177) ViewSonic PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 15
screen, elevating the front side oAfCthINe CONTROL q projector within 8 degrees. This projector has 2 elevator feet and 2 projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector ViewSonic CR/PR 10 Security slot PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 16
B/CB/PB B/CR/PR H V REMOTE CONTROL USB CONTROL Speakers (wiht an amplifier) AUDIO IN S-VIDEO OUT R L AUDO IN OUT VIDEO OUT R L AUDO IN OUT Y CB/PB CR/PR COMPONENT VIDEO OUT R L AUDO IN OUT VCR/DVD player WARNING ►Do not disassemble or modify the projector. ►Be careful not to
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 17
projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual projector is a Plug-and-Play monitor. NOTE for HDMI • The HDMI supports the projector is
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 18
ViewSonic to newly get correct one. • Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation. • Never modify the power cord. ViewSonic 13 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 19
vision problems. CAUTION ►Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Putting batteries Please load the batteries before using the remote control. If the remote control starts to malfunction, replace the
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 20
, attempt to change the signal frequency. Please remember that the "REMOTE FREQ." in SERVICE item of OPTION menu of the projector to be controlled should be set to the same mode as the remote control. To set the mode of the remote control, slide the knob of the frequency switch inside the battery
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 21
as a wired remote control The accessory remote control works as a wired remote control, RGB OUT Y RGB1 CB/PB when the wired control port at the bottom of the AUDIO IN 1 AUDIO IN 2 remote cVIDoEO ntrol connects with the REMOTE CONTROL port on the back of the projector via an
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 22
connected to the projector and the outlet. 2. Remove the lens cover, and the projector or the remote control. The projection lamp will lamp light on without pushing the STANDBY/ON button. • Use the shutdown switch only when the projector is not turned off by normal procedure. ViewSonic 17 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 23
1  RGB 2  HDMI VIDEO  S-VIDEO  COMPONENT (Y, CB/PB, CR/PR) 1. Press the RGB button on the remote control to select an input port for the RGB signal. Each time you press the button, the projector switches its RGB input port as below. RGB 1  RGB 2  HDMI LASER INDICATOR STANDBY/ON VIDEO RGB
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 24
LASER INDICATOR STANDBY/ON VIDEO RGB 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. BLANK LASER  For an keeps the original aspect ratio of the signal.FREEZE KEYSTONE SEARCH ViewSonic 19 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 25
Top UP Lens shift LASER INDICATOR cover DOWNSTANDBY/ON VIDEO RGB BLANK LASER LEFT RIGHT Using the automatic adjustment feature 1. Press the AUTO button on the remote control. ASPECT PUSH selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu. ViewSonic 20 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 26
the remote control. , if the projector screen is inclined lens type LEN-003 only), this function may not work well. ● W hen the horizontal lens shift is not set to the center, this function may not work well. ● This function will be unavailable when Transition Detector is on. ViewSonic 21 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 27
the projector's buttons or remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, KEYSTONE, MENU, MAGNIFY and MY BUTTON1/2(except MY MEMORY or PICTURE MODE is assigned to) is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 28
/ON VIDEO RGB BLANK LASER ● The projector automatically returns to the input signal screen whenASPoECTne of the projector's buttons or the remote control buttons (except ASPECT, POSITION, PUSH ENTER the volume or mute first. ON 1 MUTE OFF 2 FREEZE KEYSTONE SEARCH ViewSonic 23 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 29
on the projector or remote control, or the ESC button on the remote control. 5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you do not do anything, the dialog will automatically disappear after about 10 seconds. ViewSonic 24 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 30
table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE a certain extra such as a line may appear. (continued on next page) ViewSonic 25 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 31
MIRROR item in SETUP menu. Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION or NETWORK. ViewSonic 26 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 32
on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute The darkest tone at the left end of the test pattern cannot be controlled with any of equalizing adjustment bar. • When this function is performed
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 33
may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. (continued on next page) ViewSonic 28 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 34
Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó TURN OFF ACTIVE or THEATER modes are selected. If this occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE into the memory. ViewSonic 29 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 35
item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it when the OVER SCAN is set to 10. (continued on next page) ViewSonic 30 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 36
such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. Selecting this item performs the automatic adjustment feature. For an RGB or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu. ViewSonic 31 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 37
using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it be good to select a suitable mode except AUTO. (continued on next page) ViewSonic 32 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 38
SCART RGB input to the projector. For details, contact ViewSonic. RGB RGB1 RGB2 M1-D OUT AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL CO AUDIO IN 3 AUDIO , try finding a more suitable mode. (continued on next page) ViewSonic 33 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 39
, remove the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal. (continued on next page) ViewSonic 34 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 40
) Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. previous resolution. • For some pictures, this function may not work well. ViewSonic 35 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 41
projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control projector is the projector screen is projector is placed on the level (about ±3°), this function may not work. • When the projector the horizontal lens shift is
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 42
whenever possible. • When the vertical lens shift is not set fully upward (not set fully downward for the optional lens type LEN-003 only), this function may not work Transition Detector Alarm will be displayed when projector is restarted after the power switch is turned off. ViewSonic 37 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 43
the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to weakend. Item VOLUME TREBLE BASS SRS WOW SPEAKER AUDIO HDMI AUDIO ViewSonic Description Using the ▲/▼ buttons adjusts the volume. High ó Low ó 2 38 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 44
using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it the plain black screen after several minutes. (continued on next page) ViewSonic 39 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 45
TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu, the START UP is fixed to MyScreen. (continued on next page) ViewSonic 40 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 46
screen. Please wait for the target image to be displayed, and press the ENTER button on the remote control when the image is displayed. The image will freeze and the frame for capturing will appear. To stop PASSWORD of SECURITY item in OPTION menu. (continued on next page) ViewSonic 41 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 47
, please remember if the picture is freezing. Do not mistake freezing for a malfunction. Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME CANCEL on screen and press the ENTER or INPUT button. ViewSonic 42 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 48
an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 49
indication about the lamp. • For the lamp replacement, see the section "Lamp". The filter time is the usage time of the air filter, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. To
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 50
buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  LENS TYPE  KEY LOCK SERVICE FACTORY RESET  INFORMATION  REMOTE FREQ.  REMOTE RECEIV. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 51
rise, which could cause malfunction, or reduce the lifetime of the projector. • Please be careful with the operating environment of the projector and the condition of the air filter. LENS TYPE Select the lens type currently used using the ▲/▼ buttons. 1 ó 2 ó 3 ó 4 ó 5 Please select one of them
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 52
on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. REMOTE RECEIV. (1) Select a remote sensor using the ▲/▼ button. 1:FRONT ó 2:TOP ó 3:REAR SERVICE
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 53
make note of the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX. • Please do not forget your PASSWORD. (continued on next page) NEW PASSWORD AGAIN BOX NOTE NEW PASSWORD BOX ViewSonic 48 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 54
BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code will be same PASSWORD again. PASSWORD AGAIN BOX (continued on next page) ViewSonic 49 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 55
please make note of the PASSWORD during this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to NOTE PASSWORD BOX MyScreen PASS WORD on/off menu. When a PASSWORD and the PIN BOX will be displayed. (continued on next page) ViewSonic 50 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 56
anytime the projector is restarted The projector can projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector only when the projector is started after the projector will turn off. Inquiring Code (PIN Code) 3.3-2 Contact ViewSonic
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 57
of the PASSWORD during this time. Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the NOTE PASSWORD BOX Transition Detector on/off menu. • Please do not forget your Transition Detector PASSWORD. (continued on next page) ViewSonic 52 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 58
PASSWORD BOX (large). The 10 digit Inquiring Code will be displayed inside the BOX. 4.4-3 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is PASSWORD function is set to TURN OFF. (cVoinetwinSuoendicon next page) 53 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 59
will be displayed on the INPUT-INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off ViewSonic 54 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 60
on/off menu. (2) S elect TURN OFF to display the ENTER PASSWORD BOX (large). The 10 digit inquiring code will be displayed inside the box. (3) C ontact ViewSonic with the 10 digit inquiring code. Your PASSWORD will be sent after your user registration information is confirmed
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 61
▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide for details of NETWORK operation
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 62
• The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with address. The DNS server is a system to control domain names and IP addresses on the Network. Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 63
PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR character or all characters will be erased. The PROJECTOR NAME can be input up to 64 characters. . To revert to the previous PROJECTOR NAME without saving changes, move the cursor to
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 64
an image to display the e-SHOT RESET menu. (2) P ress the ENTER button on the remote control or the INPUT button on the projector to perform to erase. To stop erasing, press the ESC button on the remote control or the ◄ button on the projector. (continued on next page) ViewSonic 59 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 65
. Choose the RESTART using the button ►. SERVICE Then use the button t�o��e�x�e�c�u�t�e�. Network will be once cut off when choose restart. If DHCP is selected on, IP address may be changed. After selecting RESTART, NETWORK menu may not be controlled approx. 30 seconds. ViewSonic 60 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 66
via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to configure the network settings, monitor the projector and so on. ViewSonic 61 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 67
the network, and up to 4 image data can be stored in the projector and displayed on screen one by one. Transfer image data Display image data setting Required equipment preparation The following equipments are required to connect the projector to your PC through the network. PC : 1) equipped with the
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 68
"Control Panel" from "Start" menu. 3) Open "Network and Internet Connections" in "Control Panel". * Administrator authority is the account, which can access to all functions. "Network and Internet Connections" window 4) Open "Network Connections". ViewSonic "Network Connections" window 63 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 69
Equipment connection and network setting Manual network connection setting (continued) 5) Open "Local Area Connection Properties" window you use for network device. " "Internet Protocol (TCP/IP) Properties" window 7) Set IP address, subnet mask and default gateway for PC. ViewSonic 64 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 70
manually The Network address portion included in the IP address set into your PC should be common with projector projector. For example The projector , projector has "192.168 projector's IP address can be changed by using the configuration utility via a web browser. • If the projector projector projector
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 71
Equipment connection and network setting Manual network connection setting (continued) "Internet Option" setting 1) Click "Internet Options" in "Network and Internet Click "Connections" tab and then click [LAN Settings] button to open "Local Area Network (LAN) settings". ViewSonic 66 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 72
and settings are properly or not. 1) Start browser in PC and specify following URL, then click "Go" button. URL: http://(Projector IP address)/ For example, if projector IP address is 192.168.1.10, specify URL: http://192.168.1.10/ 2) If appears, it succeeds. ViewSonic "Logon Menu" 67 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 73
perform various functions according to the date and time. e-SHOT (Still Image Transfer) Display The projector can display still images that are transferred via the network. Command Control via the Network The projector can be controlled using RS-232C commands over a network. ViewSonic 68 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 74
Windows version prior to Windows XP Service Pack 2 install security update Q832894 (MS04-004) or the web browser interface may not be displayed correctly. And when using an earlier version of Internet Explorer, during operations the browser will log out after 50 seconds. ViewSonic 69 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 75
and other security settings. Projector Control Controls the projector. Projector Status Displays and configures the current projector status. Network Restart Restarts the projector's network connection. Administrator User √ N/A N/A N/A N/A N/A N/A N/A √ √ N/A ViewSonic 70 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 76
a web browser (continued) Logon Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10 the main menu located on the left-hand side of the screen. ViewSonic 71 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 77
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Network Information All screen drawings in this manual are shown when you logon with the information is only displayed when logged on using an Administrator ID. ViewSonic 72 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 78
controlling the projector via a web browser (continued) Network Settings Displays and configures network settings. Item IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Projector the DNS server address. Click [Apply] button to save the settings. ViewSonic 73 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 79
Management with Web browser software Configuring and controlling the projector via a web browser (continued) NOTE • The new configuration ] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. ViewSonic 74 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 80
controlling the projector via a web browser (continued) Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control the network connection by clicking [Network Restart] on the main menu. ViewSonic 75 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 81
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Mail Settings Displays and [Send Test Mail]. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. ViewSonic 76 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 82
. (Off → standby mode) Authentication Failure The SNMP access is detected from the invalid SNMP community. Refer to "Troubleshooting" in the User's Manual (detailed) - Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error. ViewSonic 77 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 83
Web browser software Configuring and controlling the projector via a web browser (continued) The Alert Items are shown below. Setting Item Alarm Time SNMP Trap Send Mail Mail Subject Mail Text Description Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm.) Click [Enable
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 84
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Schedule Settings Displays and configures schedule settings. .3) schedule. Configures the specific date (No.4) schedule. Configures the specific date (No.5) schedule. ViewSonic 79 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 85
be executed. Configures the parameters for power control. Configures the parameters for input switching. projector is moved, check the date and time set for the projector before configuring the schedules. Strong shock may make the date and time settings get out of tune. ViewSonic 80 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 86
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Date/Time Settings Displays and configures the date Configures the hour daylight savings time ends (0 ~ 23). Configures the minute daylight savings time ends (0 ~ 59). ViewSonic 81 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 87
software Configuring and controlling the projector via a web on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting function, the time difference must be set. • The projector will retrieve Date and Time information from the time server
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 88
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Security Settings Displays and configures passwords and other security text can be up to 255 alphanumeric characters. Reenter the above password for verification. ViewSonic 83 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 89
controlling the projector via a web browser (continued) Item Network Control Authentication Password Re-enter Authentication Password SNMP Community name Description Configures the Authentication password for the command control '0-9' and alphabet 'a-z', 'A-Z' can be used. ViewSonic 84 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 90
the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button. Controls the projector. Item Main Power Input Source Picture Mode Blank On active iris setting. Saves the MyMemory data. Recalls the MyMemory data. ViewSonic 85 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 91
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Item Image Aspect Over Scan V Position H Position H Phase H Size the horizontal keystone distortion setting. Selects the whisper mode. Selects the mirror status. ViewSonic 86 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 92
. Remote Receiv. Rear Enable/Disable remote receiv. rear. Remote Receiv. Top Enable/Disable remote receiv. top. Remote Freq. Normal Enables/Disables the remote control signal frequency normal. Remote Freq. High Enables/Disables the remote control signal frequency high. ViewSonic 87 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 93
Management with Web browser software Configuring and controlling the projector via a web browser (continued) Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description Displays the
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 94
the projector via a web browser. Wait 1 minute or more after clicking [Restart] button to log on again. • The Logon menu is displayed after restarting the projector's network connection if the DHCP is set to ON. Logoff When [Logoff] is clicked, the Logon menu is displayed. ViewSonic 89 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 95
e-mail settings are correct. The following mail will be delivered to the specified addresses. Subject line :Test Mail Text :Send Test Mail Date Time IP Address MAC Address ViewSonic 90 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 96
button to save the settings. Failure/Warning e-mails are formatted as follows: Subject line : Text : Date Time IP Address MAC Address ViewSonic 91 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 97
by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP Settings Configure the following items via a web browser to use SNMP. Example: If is not required. 9) Click [Apply] button to save the settings. ViewSonic 92 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 98
including power on / power off. It enables to be "self-management" projector. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • The so on. • Be sure to set the date and time before enabling scheduled events. ViewSonic 93 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 99
schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not will lights orange or green when the projector gets is receiving the power. ViewSonic 94 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 100
web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http:// Replace the battery by following the instructions on replacing the battery. • The internal clock's time may not remain accurate. Using SNTP is recommended to maintain accurate time. ViewSonic 95 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 101
Image Transfer e-SHOT transmission requires an exclusive application for your PC. You can download it from the ViewSonic web site. Refer to the manual for the application for instructions. To display the transferred image, select the e-SHOT item in the NETWORK Menu. For more information, please
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 102
web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), and Image Transfer Port ViewSonic 97 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 103
transmission function. Command Control Settings Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to the check box. 5) Click [Enable] check box to open Network Control Port2 (Port: 9715) to use TCP #9715. Click [Enable]
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 104
to save the settings. NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), and Image Transfer Port (Port: 9716). • The new configuration network connection by clicking [Network Restart] on the main menu. ViewSonic 99 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 105
Management with Web browser software Command Control via the Network (continued) Command Format Command formats differ among the different communication ports. ● TCP #23 the checksum. Connection ID → Random value from 0 to 255 (This value is attached to the reply data) ViewSonic 100 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 106
Management with Web browser software Command Control via the Network (continued) Reply Data format The byte Reply 0x1C Error code 2 bytes Reply Data 0x1D 2 bytes Reply Status code 0x1F 2 bytes Reply 0x1F Authentication
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 107
Control via the Network (Continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector data can be omitted when the same connection. ViewSonic 102 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 108
a new lamp, contact ViewSonic and tell the lamp type number. Type number = RLC-038 (DT00871) Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. The lamp cover 2. Prepare a new lamp. If the projector is mounted on a ceiling
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 109
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 110
may shut down, when the projector heats too much. Please replace the air filter when it is damaged or too soiled. Preparation of a new air filter is recommended. To prepare a new air filter, contact with ViewSonic and tell the air filter type number. Cleaning the air filter The front side of the
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 111
. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. • The projector may display the message such as "CHECK THE AIR FLOW" or turn off the projector, to prevent the internal heat level rising. ViewSonic 106 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 112
not to lose it. 4. Turn the projector over once more, so that the bottom faces up, and reload the battery correctly. • The internal clock's time will be reset when the battery is removed. Please reconfigure the time via the menu or a web browser after replacing the battery. ViewSonic 107 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 113
to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 114
HIGH. A note of precaution when cleaning the air filter. Please immediately turn the power off, and clean or change the air filter referring to the "Air filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer. ViewSonic 109 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 115
follow the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact ViewSonic or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 116
schedule is saved to the projector. (Please refer to the User's Manual-Network Guide: Schedule Settings for more information projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. ViewSonic 111 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 117
the smoke or odor has stopped, contact ViewSonic or service company. 1. Before requesting repair, please check in accordance with the following chart. This operation sometimes resolves your problem. If the situation cannot be corrected, 2. The projector's microprocessor may need to be reset. Please
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 118
using the menu function 18 or the remote control. Sound does not The AUDIO setting is not correct. come out. Correctly set the items in the AUDIO menu. 38 The audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports Linear PCM audio 12 only. Check
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 119
approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens is dirty or misty. Clean the lens referring to the section "Caring for
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 120
the "Troubleshooting" and run through the suggested checks. If this does not resolve the problem, please contact ViewSonic or service company. They will tell you what warranty condition is applied. Specifications Item Product name Liquid Panel size Crystal Drive system Panel Pixels Lens Lamp Audio
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 121
Specifications (continued) Specifications 319 418 [unit: mm] 154 139 ViewSonic 116 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 122
South Africa www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/Support/Calldesk.htm T= 1-800-688-6688 F= 1-909-468-1202 [email protected] ViewSonic 117 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 123
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 124
Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic .com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1h 06-25-07 119 PJ1173
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 125
to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 2. Take or ship the product in the original container packaging to an authorized ViewSonic service center. 3. Round trip transportation costs
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 126
for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com
ViewSonic PJ1173 | PJ1173 User Guide, English - Page 127