ViewSonic PJ1173 PJ1173 User Guide, English - Page 83
Setting Item, Description, Alarm Time, SNMP Trap, Enable], Send Mail, Cold Start, Authentication
UPC - 766907299014
View all ViewSonic PJ1173 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Management with Web browser software Configuring and controlling the projector via a web browser (continued) The Alert Items are shown below. Setting Item Alarm Time SNMP Trap Send Mail Mail Subject Mail Text Description Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm.) Click [Enable] check box to enable SNMP Trap alerts. Click [Enable] check box to enable e-mail alerts. (Except Cold Start and Authentication Failure.) Configures the subject line of the e-mail to be sent. The length of the subject line can be up to 255 alphanumeric characters. (Except Cold Start and Authentication Failure.) Configures the text of the e-mail to be sent. The length of the text can be up to 1024 alphanumeric characters. (Except Cold Start and Authentication Failure.) Click [Apply] button to save the settings. NOTE • The trigger of Filter Error e-mail is depending on the FILTER MESSAGE setting in the SERVICE item of the OPTION menu which defines the period until the filter message is displayed on the projector screen. The e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500, 600, 700 or 800 hours based on the configuration. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN OFF. • Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) of the lamp timer. When the lamp hour exceeds this threshold that is configured through the Web page, the e-mail will be sent out. • Filter Time Alarm is defined as a threshold for e-mail notification (reminder) of the filter timer. When the filter hour exceeds this threshold, the e-mail will be sent out. ViewSonic 78 PJ1173