ViewSonic PJ1173 PJ1173 User Guide, English - Page 99
Logon], Schedule Settings], Sunday], Enable], Apply], Register], Cancel], Delete]
UPC - 766907299014
View all ViewSonic PJ1173 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Management with Web browser software Event Scheduling (continued) Schedule Settings Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter the Administrator ID and password and click [Logon]. 3) Click [Schedule Settings] on the main menu and select the required schedule item. For example, if you want to perform the command every Sunday, please select [Sunday]. 4) Click [Enable] check box to enable scheduling. 5) Enter the date (month/day) for specific date scheduling. 6) Click [Apply] button to save the settings. 7) Click [Add] to create new event. After configure the time, command and parameters, click [Register] to add the new event. To return the previous page, click [Cancel] button. 8) Click [Delete] button when you want to delete a schedule. There are three types of scheduling. 1) Daily: Perform the specified operation at a specified time every day. 2) Sunday ~ Saturday: Perform the specified operation at the specified time on a specified day of the week. 3) Specific Date: Perform the specified operation on the specified date and time. NOTE • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 "Power ON" schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function does not work when the power switch is turned off, [O] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power. ViewSonic 94 PJ1173