ViewSonic PJ1173 PJ1173 User Guide, English - Page 118
Phenomena that may be easily mistaken for machine defects continued
UPC - 766907299014
View all ViewSonic PJ1173 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Troubleshooting Phenomena that may be easily mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page The signal cables are not correctly connected. Correctly connect the audio cables. 11 The MUTE function is working. Restore the sound pressing the MUTE or VOLUME button 18 on the remote control. The volume is adjusted to an extremely low level. Adjust the volume to a higher level using the menu function 18 or the remote control. Sound does not The AUDIO setting is not correct. come out. Correctly set the items in the AUDIO menu. 38 The audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports Linear PCM audio 12 only. Check the audio setting on your HDMI equipment. The audio on the HDMI input is muted. Change the audio setting in the AUDIO menu. 38 The digital audio in HDMI signal does not work well. Use the analogue audio, connecting either an RCA audio 11 cable or stereo mini cable. The lens cover is attached. Remove the lens cover. 4, 17 The signal cables are not correctly connected. Correctly connect the connection cables. 11 The brightness is adjusted to an extremely low level. No pictures are Adjust BRIGHTNESS to a higher level using the menu displayed. function or the remote control. 26, 27 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play 12 monitor using another plug and play monitor. The BLANK screen is displayed. Press the BLANK button on the remote control. 23 The HDMI cable is not correctly connected. Correctly connect the HDMI cable. 11 No pictures or disturbed Your HDMI equipment is not compatible with the projector This projector can be connected with another equipment that has HDMI or DVI connector, but with some equipment 12 pictures are the projector may not work properly. displayed on HDMI input. Your HDMI equipment and the projector are not harmonized. Turn off the both equipment, and turn on them again - The signal format on the HDMI is not supported. Check the video setting on your HDMI equipment. 12 View(SCoonnictinued on next page) 113 PJ1173