Vtech Cordless Phone with Digital Answering System and Caller ID User Manual ( - Page 29

• If you have programmed a home area code (page 10), only the last seven digits of the incoming phone numbers from that area code will be displayed while reviewing the call log. Press # repeatedly to display all possible dialing options. Telephone operation Review the call log 1. Press /VOL-/CID to view the call log when in idle mode. 2. Press or to scroll through the entries. There will be an error tone when you reach the end of the call log list and the screen will display END OF LIST. Make call log entries ready to dial Although the call log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial only the seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits. You can change the number of digits that you dial from or store in the call log. While reviewing the call log, press # repeatedly to display different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory. See the example on the right. You may also press 1 repeatedly to add or remove a 1 in front of the telephone number before dialing or saving it in the directory. See the examples on the right. When the number displayed is in the correct format for dialing, press /FLASH to call the number. 800-595-9511 1-800-595-9511 595-9511 1-595-9511 800-595-9511 1-800-595-9511 595-9511 1-595-9511 26 www.vtechphones.com