Weider 9025 Uk Manual - Page 10

12. Slide a Grip (41) onto a VKR Handle (42). Attach 12 the VKR Handle to the Left VKR Arm (13) with an M10 x 55mm Bolt (80), two M10 Washers (71), a 7mm Spacer (43), and an M10 Nylon Locknut (72). Press a 25mm Round Inner Cap (105) into the bottom of the VKR Handle (42). Repeat this step with the Right VKR Arm (12). 41 42 43 80 71 72 13 12 71 105 Cable Assembly 13 13. Locate the Butterfly Cable (55). Attach the Cable to the indicated Cable Pivot (58) with an M8 x 20mm Shoulder Bolt (93) and an M8 Nylon Locknut (73). 14. Wrap the Butterfly Cable (55) over a "V"-pulley 14 (47). Attach the "V"-pulley and a Cable Trap (48) to the Front Upright (4) with an M10 x 60mm Bolt (95) and an M10 Nylon Locknut (72). 15. Wrap the Butterfly Cable (55) under a 90mm 15 Pulley (46). Attach the Pulley and two Pulley Covers (49) to the Double "U"-bracket (51) with an M10 x 53mm Bolt (88) and an M10 Nylon Locknut (72). Make sure the small tabs on the Pulley Covers are on the top. 16. Wrap the Butterfly Cable (55) over a "V"-pulley 16 (47). Attach the "V"-pulley and a Cable Trap (48) to the Front Upright (4) with an M10 x 60mm Bolt (95) and an M10 Nylon Locknut (72). 73 55 93 58 72 4 48 47 95 55 Small Tab 55 49 46 88 49 51 72 48 95 55 4 47 72 10