Weider 9025 Uk Manual - Page 14
Seat Assembly
View all Weider 9025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Seat Assembly 31. Attach a VKR Arm Pad (64) to the Left VKR Arm (13) with two M6 x 53mm Screws (70) and two M6 Washers (69). Repeat this step with the Right VKR Arm (12). 31 69 12 70 32. Attach a VKR Back Pad (63) to the Rear Upright 32 (3) with two M6 x 65mm Screws (77) and two M6 Washers (69). 63 64 13 69 70 33. Attach the Backrest (61) to the Front Upright (3) with two M6 x 65mm Screws (77) and two M6 Washers (69). 33 61 4 69 77 3 77 69 69 77 34. Press a 38mm Square Inner Cap (29) into the Seat Frame (7). Attach the Seat Plate (28) to the Seat Frame (7) with an M6 x 50mm Carriage Bolt (78), an M6 Washer (69), and an M6 Nylon Locknut (90) as shown. Do not tighten the Locknut yet. Attach the Seat (62) to the Seat Plate (28) with two M6 x 16mm Screws (76). Next, attach the Seat to the Seat Frame (7) with an M6 x 53mm Screw (70) and an M6 Washer (69). Tighten the M6 Nylon Locknut (90). 34 62 78 28 29 76 7 69 70 90 14