Weider 9250 Uk Manual - Page 10
end of the Left Butterfly Arm 47. Press a Sleeve
View all Weider 9250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
11. Press a 38mm Square Inner Cap (32) into the 11 end of the Seat Frame (36). Attach the Bumper (87) to the Seat Frame (36) with the M5 x 20mm Self-tapping Screw (80). 32 36 87 80 12. Attach the Seat Frame (36) to the Front Upright 12 (42) with the M10 x 80mm Carriage Bolt (99) and the Seat Knob (49). 99 42 49 36 13. Press two 38mm Square Inner Caps (32) into the 13 ends of the Leg Lever (29). Lubricate an M10 x 60mm Bolt (7). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and an M10 Nylon Locknut (21). Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot easily. 7 36 Lubricate 32 21 29 32 14. Press a 50mm Square Inner Cap (44) into the 14 end of the Left Butterfly Arm (47). Press a Sleeve (105) into the round tube on the Left Butterfly Arm. Wet the lower end of the Left Butterfly Arm (47) with soapy water. Slide a Large Foam Pad (45) onto the Left Butterfly Arm. Repeat this step with the Right Butterfly Arm (not shown). 10 105 47 45 44