Weider 9400 Instruction Manual - Page 15

50mm x 75mm Inner Cap (58) 50mm x 70mm Inner Cap (95) 50mm Square Inner Cap (105) 25mm x 40mm Inner Cap (117) 40mm x 50mm Inner Cap (21) This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled. 38mm Square Inner Cap (67) 25mm Round Inner Cap (29) 20mm x 40mm Inner Cap (116) 25mm Round Outer Cap (121) Note: Assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged in separate bags. WAIT UNTIL YOU BEGIN EACH ASSEMBLY STAGE TO OPEN THE PARTS BAG LABELLED FOR THAT ASSEMBLY STAGE.