Weider Pro 2000 Uk Manual - Page 8
Insert the Weight Tube 12 into the Weights 15. - seat
View all Weider Pro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Slide ten Weights (15) onto the Weight Guides 4 (10), with the slot for the Weight Pin (not shown) on the bottom and on the side facing away from the Upright (3). Insert the Weight Tube (12) into the Weights (15). Lubricate the indicated holes in a Weight (15) with grease. Slide the Weight onto the Weight Guides (10). 10 Lubricate 15 3 12 15 5. Attach the Top Frame (4) to the Upright (3) with 5 two M8 x 68mm Bolts (63) and two M8 Nylon Locknuts (69). Do not tighten the Nylon Locknuts yet. Attach the Top Frame (4) between the Weight Guides (10) with an M10 x 155mm Bolt (62), two M10 Washers (70), and an M10 Nylon Locknut (68). Tighten the Nylon Locknuts (68, 69) used in steps 2 and 5. 4 62 70 63 3 69 10 70 68 6. Attach the Seat Frame (8) to the Upright (3) with an M8 x 70mm Carriage Bolt (86) and an M8 Knob (82). Attach the Bumper (75) to the Seat Frame (8) with an M4 x 19mm Self-tapping Screw (76) and an M4 Washer (77). 6 3 86 8 76 82 77 75 8