Weider Pro 8000 Uk Manual - Page 17
Route the Leg Lever Cable 70 through the Right
View all Weider Pro 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
37. Grease the shoulder of an M8 x 22mm Shoulder 37 Bolt (88). Attach the Ab Cable (72) to the bracket on the Right Upright (4) with the Bolt and an M8 Nylon Locknut (115). Make sure the flat edge of the Cable is against the bracket on the Upright. 72 115 88 4 Grease Flat Edge 38. Locate the Leg Lever Cable (70). Route the Cable through the Leg Lever (11) and the Right Seat Frame (9). Make sure the Cable is over the rod in the Seat Frame. Attach a 90mm Pulley (39) inside the Leg Lever (11), over the Leg Lever Cable (70), with an M10 x 65mm Bolt (96), two M10 Washers (116), two 12mm Spacers (75), and an M10 Nylon Locknut (114). 38 116 75 114 11 70 39 9 Rod 116 75 96 39. Attach a 90mm Pulley (39) inside the Right Seat 39 Frame (9), over the Leg Lever Cable (70), with an M10 x 45mm Bolt (138) and an M10 Nylon Locknut (114). 114 39 9 70 138 40. Route the Leg Lever Cable (70) through the Right 40 Upright (4) and under a 90mm Pulley (39). Attach the Pulley and two Half Finger Guards (42) to the Right Base (1) with an M10 x 48mm Bolt (101) and an M10 Nylon Locknut (114). 41. Wrap the Leg Lever Cable (70) over a 90mm Pulley (39). Attach the Pulley and two Half Finger 41 Guards (42) to the Double "U"-bracket (52) with an M10 x 48mm Bolt (101) and an M10 Nylon Locknut (114). 17 114 42 4 70 39 1 42 101 114 42 52 42 101 39 70