Weider Pro 8000 Uk Manual - Page 22
Seat Assembly
View all Weider Pro 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
62. Wrap the Press Cable (69) under a 90mm Pulley (39). Attach the Pulley, two M10 Washers (116), 62 and two Half Finger Guards (42) to the Left Base (2) with an M10 x 52mm Bolt (102) and an M10 Nylon Locknut (114). 63. Attach the end of the Leg Press Cable (69) to the 63 "U"-bracket (50) with an M8 Washer (117) and an M8 Nylon Locknut (115). Note: Do not complete- ly tighten the Locknut; it should be tightened so that only two threads of the Cable show past the Locknut, as shown in the inset draw- ing. 116 42 69 42 116 39 102 114 2 115 117 50 69 50 115 Seat Assembly 64 64. Attach the Seat (29) with the serial number decal on the bottom to the Right Seat Frame (9) with four M6 x 16mm Screws (85). Repeat this step with the other Seat (29) and the Left Seat Frame (not shown). 65. Attach the Right Backrest (28) to the Right 65 Upright (4) with four M6 x 16mm Screws (85). 29 9 85 85 4 85 28 85 22