Xerox 5550N User Guide (English) - Page 109

Printing on Custom Size Paper 4. If prompted on the control panel, press the OK button to accept the paper size and type that are shown, or proceed to step 7 to change them. If you are not prompted, proceed to the next step. 5. Select Paper Tray Setup, and then press the OK button. 6. Select the tray you are configuring, and then press the OK button. 7. Select Change setup, and then press the OK button. 8. Select the appropriate type, and then press the OK button. 9. Do one of the following: ■ If your custom paper size is listed in the menu, select it, and then press the OK button. ■ If your custom paper size is not listed in the menu, select New Custom Size, and then press the OK button. 10. If you selected New Custom Size, select the custom width and height: a. For Short Edge, use the Up Arrow and Down Arrow buttons to specify the short edge, and then press the OK button. b. For Long Edge, use the Up Arrow and Down Arrow buttons to specify the long edge, and then press the OK button. c. If the control panel prompts you for the Paper Orientation, use the Up Arrow and Down Arrow buttons to select the direction you are feeding the paper into the tray, and then press the OK button. 11. Either use the custom size as the document size in the application or select the appropriate tray as the paper source. Note: If you later replace the custom size in a tray with a standard size, be sure to set the new size in the control panel (or Auto Select for a size that is auto sensed). Phaser® 5550 Printer 4-48