Xerox 5550N User Guide (English) - Page 137
Selecting the Default Tray, Address, Properties, General, Printer Defaults, Tray Sequence
UPC - 095205737257
View all Xerox 5550N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Printer Settings Using the Control Panel To specify the tray sequence: 1. On the control panel, select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Tray Sequence, and then press the OK button. 4. Scroll to the desired tray sequence. (If you want to turn off tray switching, select Off.) 5. Press the OK button to save the changes. Using CentreWare IS To specify the tray sequence: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field. 3. Select Properties. 4. Select the General folder on the left navigation panel. 5. Select Printer Defaults. 6. Select the desired tray sequence from the Tray Sequence drop-down list. (If you want to turn off tray switching, select Off.) 7. Click the Save Changes button at the bottom of the screen. Selecting the Default Tray If you do not want to use tray switching, you can accept the default order of tray selection. The default tray contains the paper type and size used for printing jobs unless overwritten by a driver selection. When the default tray is empty, or contains a different paper type, you are prompted to load the correct paper type in the tray even if another tray contains the correct paper type and size for the job. You can select the default tray by two different methods: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To select a default tray: 1. Select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Paper Source, and then press the OK button. 4. Scroll to the desired tray to use as the default tray. (If you want tray switching enabled, select Auto Select.) 5. Press the OK button to save the change. Note: The driver overrides the control panel settings and CentreWare IS for tray selection. Phaser® 5550 Printer 5-7