Yamaha DTX500 Owner's Manual - Page 32

7 Create Your Own Original Drum Kit 24 Set the Program Change and Bank Select When a Drum Kit is selected, this function sets the MIDI Program Change Number and the Bank Select MSB and LSB that will be transmitted. This can be set for each MIDI channel. By transmitting a program change message, you can have the voice of an external MIDI device automatically change when switching the Drum Kit on the DTX500. * The ˙/¶ indication is not shown in the upper right corner of the display. Use the [>] button to call up the KIT24 page, then rotate the jog dial to make the following settings. MIDI Channel Program Change Transmit On/Off KIT24*PC~Ch1=on "PC003~M000L003, Program Change Number Bank Select LSB Bank Select MSB * When the Program Change Transmit On/Off is set to "off," values for PC, M and L will be "---" and the settings cannot be made. ● MIDI Channel 1-16 Target MIDI channel for the Program Change ● Program Change Transmit On/Off on Transmits. off Does not transmit. ● Program Change Number 001-128 ....... Transmitted program change number. ● Bank Select MSB, LSB 000-127 ....... Bank select MSB number, LSB number * For more information on Bank Select MSB and LSB, refer to the Voice List and MIDI Data Format documents, etc. of the particular external MIDI device you are using. 25 Set MIDI Volume and Pan-Control Change This function sets the MIDI Control Change Volume and Pan values that will be transmitted when a Drum Kit is selected. This can be set independently for each MIDI channel. This lets you automatically change the voice Volume and Pan on an external MIDI device when you switch the Drum Kit of the DTX500. * The ˙/¶ indication is not shown in the upper right corner of the display. Use the [>] button to call up the KIT25 page, then rotate the jog dial to make the following settings. MIDI Channel Control Change Transmit On/Off KIT25*CC~Ch1=on "Vol=127~Pan=~64 Volume Pan * When the Control Change Transmit On/Off is set to "off," values for Vol and Pan will show "---" and the settings cannot be made. ● MIDI Channel 1-16 Target MIDI channel for Control Change messages ● Control Change Transmit On/Off on Transmits. off Does not transmit. ● Volume 0-127 Sets the Volume Control Change data value that will be transmitted. ● Pan 0-127 Sets the Pan Control Change data value that will be transmitted. 26 Save the Original Voice To save the Drum Voice you created, use the Store operation described below and save it to the DTX500's memory. Original kits can be saved as a Drum Kit to the User Drum Kit (51-70) memory locations. NOTICE • If you select a different Drum Kit before performing the Store operation, all changes you have made to the data will be lost. If you want to keep settings or changes, make sure to perform the Store operation. 26-1. Press the [SAVE/ENTER] button. The following display will appear. Store destination KIT~save~to~51 :[Oak~Custom~~] Edited Drum Kit name 26-2. Rotate the jog dial to select the destination user Drum Kit number (51-70) that you want to store. * Data cannot be stored to the Preset Drum Kits (1-50). * You can save data to a User Drum Kit number that already contains data. However, be careful when doing this, since the previous data will be overwritten with the new data. 32 DTX500 Owner's Manual