Yamaha DTX500 Owner's Manual - Page 37
ƒsnare, RejLv1=3Frm=56, CopyToInput, Input, Completed, RejLvl, Range]
UPC - 086792942155
View all Yamaha DTX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
8 Trigger Setup Edit TRG7 RejLvl (Specified Rejection Level) TRG7~ ƒsnare~~0% "RejLv1=3Frm=56, RejLvl [Range] 0-9 Frm [Range] 1-6, 56 (5 and 6), 7-12, 17 (1 and 7), tm, cy, tc This setting is used to prevent crosstalk between the input jack assigned in the upper half of the page and the input jack assigned in the "Frm=" setting. After an triggering event occurs from the pad that is assigned in the "Frm=" setting, the pad assigned in the upper half of the display will not sound for a certain length of time unless the input level is greater than the value set here. Larger values will require a greater input level in order to produce a trigger event. A "Frm="56" setting assigns trigger input jacks 5 and 6. A "Frm="17" setting assigns trigger input jacks 1 and 7. A "Frm="tm" setting assigns trigger input jacks 2, 3, and 4. A "Frm="cy" setting assigns trigger input jacks 5, 6, 7, and 9. A "Frm="tc" setting assigns trigger input jacks 2, 3, 4, 5, 6, 7, and 9. TRG8 CopyToInput (Trigger Setup Copy) 2. Press the [SAVE/ENTER] button. A prompt appears asking confirmation of the Copy operation. Input~Copy~to~2 ~Are~you~sure~? 3. Press the [SAVE/ENTER] button to actually execute the Copy operation. * To cancel the Copy operation, press any button except for the [SAVE/ENTER] and [SHIFT] buttons (the jog dial can also be used to cancel the operation). The following display appears after the Copy operation is complete. ~~~Completed! TRG8 ~ƒsnare "CopyToInput=~2, This function allows you to copy all data settings in pages [TRG2 Type (Pad Type)] through [TRG7 RejLvl (Specified Rejection Level)] to another input jack. NOTICE • When the Trigger Setup Copy operation is carried out, the Trigger Setup data will be replaced with the settings of the copy source. Operation 1. Hit a pad to select the copy source (input jack) from which the data will be copied. Rotate the jog dial and assign the copy destination (input jack). Copy source (input jack) TRG8~ ƒsnare "CopyToInput=~2, Copy destination (input jack) 37 DTX500 Owner's Manual