Yamaha DTXPLORER Owner's Manual - Page 17

Play Along With a Song! The DTXPLORER's built-in sequencer contains data for 22 songs that, in addition to drums, include accompaniment with keyboard, brass, and other voices. Try playing along with a song! 1. Select a Song Select one of the DTXPLORER's songs and listen. Press the [SONG >/■] button to view the Song Select display. SONG ƒ=120 '¬ 1 :Demo1 Use the [] buttons to flash the song number, then use the jog dial to select the song number (1 to 22) you want to listen to. * The drum kit will change to one that matches the selected song when a different song is selected. SONG ƒ=120 '¬ 2 :Demo2 Song Number Song Name Tempo Song Volume SONG ƒ=120 12 2 :Demo2 The tempo can also be set using the Tap Tempo Function. This function lets you set the song or metronome's tempo by tapping in tempo on a pad. With this, you can set the tempo to one that feels best to you. Refer to page 18 for more information. 4. Adjust the Tuning The song's tuning can be adjusted in increments of 10 cents. The tuning setting is found in the Utility Mode. Hold the [SHIFT] button and press the [SAVE/ENT] button to view page 1 in the Utility Mode. Next, press the [>] button 6 times to view the Master Tuning display shown below, then use the jog dial to adjust the tuning (-24.0 to 0 to +24.0). 2. Listen to the Song Press the [SONG >/■] button and after the count, the song will start playback from the beginning. After the song has played to the end, it will automatically start playing from the beginning again. Press the [SONG >/■] button to stop playback. * To return the setting to its original tempo or voice, reselect the song. * If a different song is selected during song playback, the new song will start playback from the beginning. 3. Adjust the Song's Volume and Tempo Use the [] buttons to flash the tempo value, and then use the jog dial to set the song's playback tempo (q=30 to 300). Next, press the [>] button to move the flashing cursor to the right. The speaker icon will change to a numeric value and flash. This sets the volume for the parts other than the drum (0 to 16). Rotate the jog dial and adjust the balance between the song accompaniment and your performance. UTIL5 MasterTune - Tune=+18.0 , 5. Mute the Drum Part Try playing along with the song. Hold the [SHIFT] button and press the [SONG >/■] button so that that the "˚" icon appears on the lower right side in the display. This icon indicates that the drum mute function is active. Press the [SHIFT] + [SONG >/■] buttons to mute (no sound is produced) the drum part and start playback. SONG ƒ=120 12 2 :Demo2 ˚ Now play the drum part yourself. To cancel the drum mute function, hold the [SHIFT] button and press the [SONG >/■] button again. * The drum mute function is also available during song playback. 17