Yamaha DTXPLORER Owner's Manual - Page 31

MIDI Data Format 1. Channel Message Channel messages described below are sent from the drum triggers only. Other messages are also sent with the sequencer. 1.1 Key On Key Off Note range: 0 (C-2) to 127 (G8) (10ch only) Velocity range: 1 to 127 (note on only) 1.2 Control Change 4 - foot controller (10ch only) 1.3 Program Change 2. System Exclusive Message 2.1 Parameter Change 2.1.1 GM system ON $F0 $7E $7F $09 $01 $F7 (Hexadecimal) Sets all the data except the MIDI master tuning data to its initial value. 3. System Realtime message 3.1 timing clock Sends data. 3.2 start, stop Sends data. 3.3 active sensing Send the messages within an interval of approximately 300 msec. MIDI Transmit Note Number Input 1 1 1 2 3 4 5 5 Instrument Snare Snare-open rim Snare-close rim Hi tom Mid tom Low tom Ride Ride edge Note Number 31 34 37 48 47 43 51 52 Input 6 6 7 7 7 7 8 9 Instrument Clash Clash edge HI-Hat open HI-Hat close HI-Hat foot close HI-Hat foot splash Kick Option Note Number 49 57 46 42 44 85 33 55 31