Yamaha DVD-S663 Owner's Manual - Page 14
Video connections, Component video jacks <A>, S-video jack <B>, SCART terminal <D>
View all Yamaha DVD-S663 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connections Video connections Make video connections to your receiver and TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. This unit has several types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected. This unit (Europe model) PR/ CR COMPONENT Y VIDEO COAXIAL PB/ CB S VIDEO AV AUDIO OUT DIGITALOUT VIDEO OUT PR PB Y S V Component video cable S-video cable Composite video cable (Europe and Russia models) or audio/video cable (other models) (supplied) PR PB Y S V PR/CR PB/CB Y COMPONENT S VIDEO VIDEO VIDEO IN INPUT INPUT AV receiver COMPONENT VIDEO OUT COMPONENT VIDEO IN S VIDEO OUT S VIDEO IN TV VIDEO OUT VIDEO IN SCART cable Component video jacks Component video connections achieve higher fidelity color reproduction than S-video connections by transmitting video signals on separate wires for luminance (Y: green) and chrominance (PB: blue, PR: red). Connect the VIDEO OUT - COMPONENT (Y, PB/CB, PR/CR) jacks of this unit to component input jacks of your AV receiver and then to those of your TV using a commercially available component video cable. Observe the color of each jack when you make connections. If your receiver does not have component output jacks, you can achieve a better video image by connecting the component output jacks of this unit directly to the component input jacks of your TV. S-video jack S-video connections achieve a clearer picture than composite video connections by transmitting video signals on separate wires for luminance (Y) and chrominance (C). Connect the VIDEO OUT - S VIDEO jack of this unit to an S-video input jack of your AV receiver and then to that of your TV using a commercially available S-video cable. Composite video jack Connect the VIDEO OUT - VIDEO jack of this unit to a video input jack of your AV receiver and then to that of your TV using the supplied composite video cable (Europe and Russia models) or audio/video cable (other models). SCART terminal (Europe and Russia models only) You may connect the TV directly to this unit. Connect the AV terminal of this unit to the SCART input terminal of your TV using a commercially available SCART cable. The AV terminal outputs composite and RGB video signals together with 2-ch audio signal. Set the output of the video signal in "Switching YUV/RGB (Europe and Russia models only)" on page 36. 10 En