Yamaha F01 Owner's Manual - Page 15

ENGLISH Before Using the F11/F01 Connecting the Power Cord (F11) Carefully read the following instructions and warnings before connecting the power cord. [AC INLET] connector (The shape of plug differs depending on your particular locale.) 1. Connect the supplied power cord to the [AC INLET] connector on the instrument's rear panel. For an illustration of the location of the [AC INLET] connector, see "Panel Controls and Terminals" (page 10). 2. Connect the other end of the power cord to an AC outlet. Make sure your F11 meets the voltage requirement for the country or region in which it is being used. In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area. WARNING Make sure your F11 is rated for the AC voltage supplied in the area in which it is to be used (as listed on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard! WARNING Use only the AC power cord supplied with the F11. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! WARNING The type of AC power cord provided with the F11 may be different depending on the country in which it is purchased (a third prong may be provided for grounding purposes). Improper connection of the grounding conductor can create the risk of electrical shock. Do NOT modify the plug provided with the F11. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use a plug adapter which defeats the grounding conductor. F11/F01 Owner's Manual 15