Yamaha F01 Owner's Manual - Page 47

ENGLISH Internet Direct Connection (IDC) (F11) Exporting the Connection Information This procedure lets you export the detailed information on the current connection as a text file to a USB flash memory device. You can check the information on your computer. NOTE The connection information file does not allow you to manually make Internet settings. The connection information file is set to "read only" and cannot be edited. 1 2 Operation 1 Turn on the Export mode. Make sure that a USB flash memory device is connected to the instrument, and then press the [MOVING KEY] button while holding down the [BGM] button. NOTE The export mode cannot be engaged while voice demo song playback is in use (page 29) or the unit is in BGM mode (page 12) or when the [REC] button is on (page 38) or user song playback is active (page 40). CAUTION To cancel exporting, press any button (except the [PLAY/STOP], [-/NO] and [+/YES] buttons) before pressing the [PLAY/STOP] button in step 2. 2 Start exporting. Press the [PLAY/STOP] button. A "n-y" message will appear on the display if a USB flash memory device contains a file with the same name as the one you are attempting to export. Press the [+/YES] button to execute the overwriting operation. Press the [-/NO] button to cancel exporting. When exporting to the USB flash memory device is completed, an "End" message will appear on the display. Press any button to exit from this display. After exporting, connect the USB flash memory device to your computer, and then open the text file named "ConnectionInfo.txt" in the root directory of the USB flash memory device to check the detailed connection information. NOTE If exporting is not successfully completed, an "Err" message and the error code will appear alternately on the display. NOTE Error Code You can check the description for the error code on the Yamaha website: http://music.yamaha.com/idc F11/F01 Owner's Manual 47