Yamaha F01 Owner's Manual - Page 54

ENGLISH About MIDI Local Control ON/OFF "Local Control" refers to the fact that, normally, the F11/F01 keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control On," since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the F11/F01 keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. Press the C5 key while holding the [BGM] button (see Quick Operation Guide). Program Change ON/OFF Normally the F11/F01 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The F11/F01 will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the F11/F01 without affecting the external MIDI device. Press the C#5 key while holding the [BGM] button (see Quick Operation Guide). TIP For information on control change messages that can be used with the F11/F01, refer to PROGRAM CHANGE on page 71. Control Change ON/OFF Normally the F11/F01 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal and other "control" settings received from the controlling device (the keyboard voice is not affected only when you select 1-16 channels on F11). The F11/F01 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the F11/F01's pedal and other controls can be operated without affecting an external MIDI device. Press the D5 key while holding the [BGM] button (see Quick Operation Guide). TIP For information on control change messages that can be used with the F11/F01, refer to the MIDI Data Format on Data List. You can download the Data List from the Yamaha website (page 6). TIP Setting range: ON/OFF Normal setting: ON TIP Setting range: ON/OFF Normal setting: ON TIP Setting range: ON/OFF Normal setting: ON 54 F11/F01 Owner's Manual