Yamaha F01 Owner's Manual - Page 33
Select a voice for the right hand., Exit Split mode., Split Balance, METRONOME], Octave Shift
View all Yamaha F01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH 3 Select a voice for the right hand. Press a voice button. 4 Select a voice for the left hand. Press the corresponding voice button while holding the [SPLIT] button. (The indicator of the Left Voice button will light while the [SPLIT] button is pressed.) You can make the following settings for right and left voices in Split: Split Balance While holding down the [METRONOME] button, press one of the F#5-F#6 keys (see Quick Operation Guide). The current balance setting appears on the display while both controls are held. A setting of "0" produces an equal balance between the two Split mode voices. Settings below "0" increase the volume of the left voice in relation to the right voice, and settings above "0" increase the volume of the right voice in relation to the left voice. Octave Shift You can shift the pitch up and down in octave steps for the right voice and left voice independently. You should make the setting depending on the note range of the songs you play. While holding down the [METRONOME] button, press one of the A4-D5 keys (see Quick Operation Guide). The current Octave Shift setting appears on the display while both controls are held. A4 -1 Right Voice A#4 0 C5 -1 Left Voice C#5 0 B4 +1 D5 +1 Left Voice Reverb Depth (F11) While holding down the [METRONOME] button, press one of the F#1-F2 keys (see Quick Operation Guide). The current Reverb Depth setting appears on the display while both controls are held. Damper Pedal Range The Damper Pedal Range function determines whether the damper pedal affects the right voice, the left voice, or both the left and right voices in Split mode. While holding down the [BGM] button, press one of the C0-D0 keys (see Quick Operation Guide). The current range setting appears on the display while both controls are held. C0 for the left Voice C#0 for both voices D0 for the right Voice 5 Exit Split mode. Press the [SPLIT] button again so that its indicator goes out. Selecting & Playing Voices TIP [VARIATION] in Split Mode You can turn the variation on or off for Split mode voices. Normally, the voice indicator of the right voice lights in Split mode. The [VARIATION] can be used to turn the variation for the right voice on or off as required. While the [SPLIT] button is held, however, the voice indicator of the left voice lights. In this state the [VARIATION] button turns the variation for the left voice on or off. TIP [REVERB] in Split Mode The Reverb Type (page 35) assigned to the right voice will take priority over the other. (If the reverb is set to OFF, the left voice's Reverb Type will be in effect.) TERMINOLOGY Normal setting: Balance will be decided according to the balance default value of the voice combination. TERMINOLOGY Normal setting: Octave will be decided according to the octave default value of the voice combination. TERMINOLOGY Normal setting: F2 Left voice Reverb Depth will be decided according to the left voice Reverb Depth default value of the voice. TIP The normal setting of Damper pedal range is "for the right Voice". F11/F01 Owner's Manual 33