Yamaha HTR 5790 MCXSP10 Manual - Page 33

PREPARATION BASIC SETUP 7 Press d to select SPEAKERS, then press j / i to select the number of speakers connected to the unit. The choices vary as follows depending on the PRESENCE setting: Choices 2 - PRESENCE setting YES NONE Front L/R - L CR SL SB SR 3 - Front L/R, - L CR SL SB SR Center Presence L/R, 4 L R Front L/R Front L/R, L CR SL SB SR Surround L/R Presence L/R, 5 L C R Front L/R, Center Front L/R, L CR SL SB SR Center, Surround L/R Presence L/R, 6 L SL R SR Front L/R, Surround L/R L CR SL SB SR Front L/R, Center, Surround L/R, Surround back Presence L/R, 7 L CR SL SR Front L/R, Center, Surround L/R L CR SL SB SR Front L/R, Center, Surround L/R, Surround back L/R Presence L/R, 8 L CR SL SB SR Front L/R, Center, - - Surround L/R, Surround back Presence L/R, L CR SL SB SR Front L/R, 9 Center, Surround L/R, - - Surround back L/R 9 Press d to select CHECK OK?, then press j / i to select: YES NO To exit the setup if the test tones were satisfactory. To adjust each speaker level (see page 50). 1 BASIC MENU 2/2 . CHECK OK?;;;;YES (when NO is selected) B)SPEAKER LEVEL - + . FR C SL Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again. 8 After you have finished the settings, press d, then press j / i to select: SET CANCEL To apply the changes. To cancel the setup. 1 BASIC MENU 2/2 . [SET CANCEL ROOM SIZE=SMALL If you select SET, you will hear a test tone from each speaker. 29