Yamaha HTR 5790 MCXSP10 Manual - Page 56
FDYNAMIC RANGE, GLOW FRQ.TEST, Low frequency test
UPC - 027108919744
View all Yamaha HTR 5790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
p p p p SET MENU ■ Dynamic range DYNAMIC RANGE Use to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. To access these parameters, select: MANUAL SETUP > SOUND MENU > DYNAMIC RANGE > F)DYNAMIC RANGE . SP: MIN STD[MAX HP: MIN STD[MAX / : Up/Down -/+ : Adjust ■ Low frequency test LOW FRQ. TEST Use this feature to adjust the output level of the subwoofer so it matches your other speakers. To access these parameters, select: MANUAL SETUP > SOUND MENU > LOW FRQ. TEST > G)LOW FRQ.TEST . TEST_TONE;;;;OFF OUTPUT;FRONT L/R FRQ;;;;;;;;;88Hz / : Up/Down -/+ : Adjust Choices: MIN (minimum), STD (standard), MAX (maximum) SP Select to adjust the speaker compression. HP Select to adjust the headphone compression. • Select MAX for feature films. • Select STD for general use. • Select MIN for listening to sources at low volume levels. 1 Press j / i to set TEST TONE to ON, and adjust the volume with VOL -/+ so you can hear the tone. Do not turn up the volume too high. If no test tone is heard, turn down the volume, set this unit in the standby mode and make sure all the necessary connections are correct. • The tone generator produces a narrow-band noise centered on a specified frequency by the band pass filter besides a wide-band noise. 2 Press d to go to "OUTPUT" and press j / i to select the speaker you want to compare with the subwoofer. Choices: FRONT L/R, FRONT L, CENTER, FRONT R, SUR.R, SBR*, SBL*, SUR.L, SWFR, PRESENCE * SB will be displayed if you selected only one surround back speaker in SURR B L/R SP (page 49). 3 Press d to go to "FRQ" and press j / i to select the frequency you want to use. Choices: 35 to 250 (Hz), Initial: 88 Hz 4 Adjust the volume of the subwoofer with the controls on the subwoofer so it matches that of the speaker you are comparing it to. y You can use the test tone not only for adjusting the subwoofer level, but also for checking the low-frequency characteristics of your listening room. Low-frequency sounds are especially affected by the listener's position, speaker placement, subwoofer polarity and other conditions. 52