Yamaha HTR 5790 MCXSP10 Manual - Page 60
Manual Setup: Option, Option, Adisplay Set, Bmemory Guard
UPC - 027108919744
View all Yamaha HTR 5790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
p p p p SET MENU Manual setup: OPTION 4 OPTION MENU . A)DISPLAY SET B)MEMORY GUARD C)PARAM. INI D)ZONE SET / : Up/Down -/+ : Select ■ Display set DISPLAY SET MANUAL SETUP > OPTION MENU > DISPLAY SET > A)DISPLAY SET . DIMMER;;;;;;;;;0 OSD SHIFT;;;;;;0 GRAY BACK;;;AUTO V CONV.;;;;;;;ON CMPNT OSD;;;;OFF / : Up/Down -/+ : Select Dimmer DIMMER Use to adjust the brightness of the front panel display. Choices: -4 to 0 OSD shift OSD SHIFT Use to adjust the vertical position of the OSD. Choices: +5 (downward) to -5 (upward) • Press + to lower the position of the OSD. • Press - to raise the position of the OSD. Gray back GRAY BACK Selecting AUTO for the on-screen display setting displays a gray background when there's no video signal input. Nothing is displayed if OFF is selected. Choices: AUTO, OFF Note If "GRAY BACK" is set to OFF, no information will be displayed on the screen when video signals are not being input. Video conversion V CONV. Use this feature to turn on/off the conversion of composite signals to both S-video and component signals. This allows you to output coverted video signals from the Svideo jack or the component video jack when no S-video or component signals are input. This feature also converts S-video signals to component signals when no component signals are input. Choices: ON, OFF • Select OFF not to convert any signals. • Select ON to convert composite signals to S-video and component signals, and to convert S-video signals to component signals. Notes • Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (composite or S-video) between each component. • When converting S-video signals from a VCR to component video signals, the picture quality may suffer depending on your VCR. Component OSD CMPNT OSD Use this feature to turn on/off OSD output to the COMPONENT VIDEO MONITOR OUT jacks when using the set menu, test tone or parameter functions. Choices: ON, OFF • Select ON to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks. • Select OFF if you do not want to output the OSD signals from COMPONENT VIDEO MONITOR OUT jacks. Note Set menu functions even when OFF is selected. ■ Memory guard MEMORY GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings. MANUAL SETUP > OPTION MENU > MEMORY GUARD > B)MEMORY GUARD [OFF ON p p / : Exit -/+ : Select Choices: ON, OFF Select ON to protect: • DSP program parameters • All SET MENU items • All speaker levels • The on-screen display (OSD) mode When MEMORY GUARD is set to ON, you cannot use the test tone or select any other SET MENU items. 56