Yamaha HTR 5790 MCXSP10 Manual - Page 39

PLAYBACK Notes • When you play DTS encoded sources with the input mode set to AUTO: - This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the "t" indicator may flash) for up to 30 second after playback of the DTS source is complete. To manually release the DTS mode, press INPUT MODE to reselect AUTO. - The DTS decoding mode may be released if search or skip operations are performed for more than 30 seconds. To prevent this, press INPUT MODE to select DTS. • If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player. Displaying the information about the input source You can display the type, format and sampling frequency of the current input signal. 1 Select the input source. PHONO TUNER CD MULTI CH IN V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD 3 Press u / d to display the following information about the input signal. + TV VOL CH - PRESET TV MUTE SELECT TV VOL - CH + PRESET (Format) in fs rate flg Signal format display. When the unit cannot detect a digital signal it automatically switches to analog input. Number of source channels in the input signal. For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/ LFE". Sampling frequency. When the unit is unable to detect the sampling frequency "Unknown" appears. Bit rate. When the unit is unable to detect the bit rate "Unknown" appears. Flag data encoded with DTS or Dolby Digital signals that cue this unit to automatically switch decoders. 2 Press AMP to select the AMP mode, then press STRAIGHT/EFFECT so that "STRAIGHT" appears in the display. AMP STRAIGHT then EFFECT BASIC OPERATION 35