Yamaha HTR 5790 MCXSP10 Manual - Page 38

PLAYBACK ■ Downmixing to 2 channels You can enjoy 2-channel stereo playback even from multichannel sources. Rotate PROGRAM (or press STEREO on the remote control) to select 2ch Stereo. PROGRAM or Front panel STEREO 1 HALL 2 JAZZ 3 ROCK 4 ENTERTAIN 5 MUSIC 6 TV THTR 7 MOVIE 8 THX /DTS NIGHT EX/ES 9 0 +10 ENTER CHP/INDEX Remote control Selecting input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. 1 Select the input source. INPUT PHONO TUNER CD MULTI CH IN or V-AUX CBL/SAT MD/TAPE CD-R DTV VCR 1 DVR/VCR2 DVD 2ch Stereo y You can use a subwoofer with this program when SWFR or BOTH is selected in LFE/BASS OUT. ■ Listening to unprocessed input signals Press STRAIGHT/EFFECT to select STRAIGHT. Two channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing. STRAIGHT STRAIGHT EFFECT Front panel or EFFECT Remote control Press STRAIGHT/EFFECT again so that "STRAIGHT" disappears from the display when you want to turn the sound effect back on. ■ Virtual CINEMA DSP Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field. If you do not connect surround speakers, Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP sound field program. Note Virtual CINEMA DSP will not activate, even when SURR L/R SP is set to "NONE" (see page 49) in the following cases: - When MULTI CH INPUT is selected as the input source. - When headphones are connected. Front panel Remote control 2 Press INPUT MODE to select an input mode. In most cases, use AUTO. INPUT MODE or Front panel TRANSMIT RE-NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP INPUT MODE PHONO TUNER CD MULTI CH IN Remote control V-AUX DVR/VCR2 VCR 1 CBL/SAT DTV DVD MD/TAPE CD-R SP A DVD AUTO CD TUNER PHONO VOLUME LR Input mode AUTO Automatically selects input signals in the following order: 1) Digital signals* 2) Analog signals DTS Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. ANALOG Selects only analog signals. If no analog signals are input, no sound is output. * If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program. y You can adjust the default input mode this unit selects when the power is turned on (see page 54). 34