Yamaha MCR E810 Owner's Manual - Page 40
Locking a disc, Changing the password, NEW PASSWORD and CONFIRM PWD
UPC - 027108104751
View all Yamaha MCR E810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Restricting Disc Playback Locking a disc You can prevent up to 40 specific discs from playback by locking the discs. Changing the password Follow the procedure below to change the password to access locked disc temporarily. 1 While the disc to be locked is loaded into the unit, press SET UP. 2 Press or to select "GENERAL SETUP PAGE", press or to select "DISC LOCK", and then press . 3 Press or to select "LOCK", and then press ENTER. To disable a lock applied to a disc Select "UNLOCK" in step 3. y • To return to the previous menu, press . To exit from the setup menu, press SET UP. • To unlock the disc lock temporarily for playback, use the number keys to enter the password in the password input area (displayed when the locked disc is loaded), and then press ENTER. 1 Press SET UP. The setup menu appears on the TV screen. 2 Press or to select "PREFERENCE PAGE", press or to select "PASSWORD", then press . Note "PREFERENCE PAGE" is available only when no disc is loaded or the DVD player is in the Stop mode (see page 25). 3 Press ENTER to display the Password change screen. 4 Use the number keys to enter the current 6-digit password in the "OLD PASSWORD" area, enter the new 6-digit password in the "NEW PASSWORD" and "CONFIRM PWD" areas, then press ENTER. Notes • The default password is "000000". • If you forget your password, enter "000000" instead of your password. y To return to the previous menu, press menu, press SET UP. . To exit from the setup 36 En