Yamaha MCR E810 Owner's Manual - Page 47
Setting the Timer
UPC - 027108104751
View all Yamaha MCR E810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Setting the Timer The receiver is equipped with 2 types of timer functions: clock timer and sleep timer. The clock timer automatically turns the receiver on or sets it to the standby mode at the specified time. The sleep timer sets the receiver to the standby mode after the specified time elapses. The DVD player also turns on or sets to the standby mode automatically if it is connected to the receiver using a system control connection (see page 12). Setting the clock timer The clock timer automatically turns the receiver on or sets it to the standby mode at the specified time. You can also specify an input which the receiver automatically selects when the clock timer turns it on. Notes • You cannot set the clock timer unless you adjust the clock (see page 19). • If you do not touch any key for more than 30 seconds after the previous key operation, the operations you made are cleared from the memory and the normal display reappears. TIMER LED TIMER PRESET/BAND NATURAL SOUND STEREO RECEIVER RX-E810 PURE DIRECT 5 Press DISPLAY again to select "OFF Time", and then specify the time when you want to turn off the receiver as well as step 4. 6 To turn off the receiver now with the clock timer set, press TIMER. TIMER LED lights up. The receiver will be turned on or set to the standby mode automatically at the specified time. y If you want to turn off the receiver by "OFF Time", press DISPLAY repeatedly to display the clock in the front panel display, and then press TIMER. The TIMER indicator lights up in the front panel display. To set or cancel the clock timer Press TIMER on the front panel while the clock is displayed or the receiver is in the standby mode. TIMER STANDBY/ON PHONES DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING BASS TIME ADJ TIMER TREBLE HOUR BALANCE MIN INPUT L R VOLUME MIN MAX DISPLAY INPUT 1 Press DISPLAY on the front panel of the receiver repeatedly to select "Timer Input". The TIMER indicator flashes in the front panel display. 2 Rotate INPUT to select an input which the receiver automatically selects when the clock timer turns it on. If you select "TUNER", you can select a band by pressing PRESET/BAND. To select a preset station, carry out steps 2 and 3 in the "Selecting preset stations" procedure (see page 39). 3 Press DISPLAY again to select "ON Time". 4 Specify the time when you want to turn on the receiver. Carry out the steps 3 and 4 in "Step 2: Adjust the clock" (see page 19) to adjust the hour and minute settings. OTHER OPERATIONS English 43 En