Yamaha POCKETRAK 2G Reference Manual - Page 13
Selecting the microphone sensitivity, With MIC ALC “ON”:
UPC - 086792884912
View all Yamaha POCKETRAK 2G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Recording Selecting the microphone sensitivity With MIC ALC "ON": 1. While the recorder is stopped, press the MENU/STOP button for at least two (2) seconds. 2. Press the Y or T button to select "VOICE", then press the W button. 3. Press the Y or T button to select "MIC SENS.", then press the W button. 4. Press the Y or T button to select "HIGH", "MIDDLE" or "LOW", then press the W button. HIGH: High sensitivity MIDDLE: Middle sensitivity LOW: Low sensitivity 5. Press the MENU/STOP button twice to exit from the menu setting mode. The setting of the microphone sensitivity is complete. 6. Press the PAUSE/REC button to start recording. With MIC ALC "OFF": 1. Press the PAUSE/REC button to enter the recording standby mode. Adjust the angle of the built-in microphones toward the sound to be recorded. SP 20 MIC 2. Press the Y or T button to adjust the microphone sensi- tivity while checking the level meter. The microphone sensitivity can be adjusted to 31 levels (Level 0 to level 30). 3. Press the PAUSE/REC button to start recording. SP 15 MIC Note: · The LCD screen changes while you adjust the microphone sensitivity as shown below. SP 20 MIC SP 15 MIC · The recorder will remember the specified microphone sensitivity for the next recording session. · Adjusting the microphone sensitivity during recording may cause unwanted noise to be recorded. Adjust the sensitivity only when the recorder is in recording standby mode. POCKETRAK 2G Reference Manual 13