Yamaha POCKETRAK 2G Reference Manual - Page 14

Adjusting the microphone sensitivity, If the sensitivity level is low

Page 14 highlights

Recording Adjusting the microphone sensitivity The level meter moves to left or right as the volume level of the sound source changes. If the sensitivity level is low: SP 15 MIC If the level meter moves only very slightly, raise the microphone sensitivity by pressing the Y button so that the level meter will move moderatley to the right. If the sensitivity level is high: SP 23 MIC If the level meter frequently moves all the way to the right and the REC/PEAK LED lights up, recorded sounds may be distorted. Press the T button to lower the microphone sensitivity. If the sensitivity level is optimum: The microphone sensitivity is optimum when the meter indicates a "-6" level consistently, without deflecting all the way to the right at loud sounds. SP 23 MIC Note: · You cannot change the microphone sensitivity setting while the recorder is stopped. · At a level of zero (0), the recording will be silent. · Turn on the MIC ALC function when you record any sound source other than music. 14 POCKETRAK 2G Reference Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Recording
14
POCKETRAK 2G
Reference Manual
Adjusting the microphone sensitivity
The level meter moves to left or right as the volume level of the sound source
changes.
If the sensitivity level is low:
If the level meter moves only very slightly, raise the micro-
phone sensitivity by pressing the
Y
button so that the
level meter will move moderatley to the right.
If the sensitivity level is high:
If the level meter frequently moves all the way to the right
and the REC/PEAK LED lights up, recorded sounds may be
distorted. Press the
T
button to lower the microphone
sensitivity.
If the sensitivity level is optimum:
The microphone sensitivity is optimum when the meter indicates
a “-6” level consistently, without deflecting all the way to the
right at loud sounds.
Note:
·
You cannot change the microphone sensitivity setting while the recorder is stopped.
·
At a level of zero (0), the recording will be silent.
·
Turn on the MIC ALC function when you record any sound source other than music.
SP 15 MIC
SP 23 MIC
SP 23 MIC