Yamaha POCKETRAK 2G Reference Manual - Page 52
FAQ, Does the available recording time specified in the the manual apply to each file?
UPC - 086792884912
View all Yamaha POCKETRAK 2G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Appendix FAQ Q: May I use a manganese battery? A: Do not use a manganese battery or NiCad battery. You may use an oxyride battery, but the battery life would be about the same as that of alkaline batteries. Q: Why do I hear a rustling noise in the recordings? A: A rustling noise may be recorded if you move the unit during recording, or even if you move your fingers while holding the unit when recording. If possible, try not to move the unit during recording. Q: How can I store the recordings onto tapes or MDs? A: Use a standard audio cable (with 3.5mm mini plugs) to connect the unit to your tape recorder or MD recorder, then dub the recordings to a tape or MD. Stereo headphone socket Microphone jack Standard audio cable Compatible audio cable Jack on the external recorder Microphone input Line input Audio cable 3.5-inch mini plug, with resistance 3.5-inch mini plug, without resistance • Use a stereo audio cable. • Before dubbing the recordings, try a test dubbing and adjust the dubbing level on the unit. • You can also dub the recordings from your tape or MD player to the unit (page 16). Q: Does the available recording time specified in the the manual apply to each file? A: No. The available recording time in each recording mode refers to the total time available for recording without changing the recording mode, and assuming that no recording files exist in the memory. For example, if you record one file until the memory is full, you cannot record further even if you change the file or folder. Q: Are there any tips to making a good recording? A: Try a test recording to set the optimum recording mode and sensitivity, since the recording condition varies with the location and circumstance. Q: I cannot play back a recorded file that was stored on the PC and transferred back to the unit. A: You may have changed the file name on the PC. If you change the file name, the file will not play, even if it is transferred back into the VOICE folder. However, you will be able to play the file if you transfer it into the MUSIC folder. 52 POCKETRAK 2G Reference Manual