Yamaha RX-V461 Owner's Manual - Page 28
AUTO:RESULT display., and CANCEL and then press
UPC - 027108927671
View all Yamaha RX-V461 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Optimizing the speaker setting for your listening room 6 Press DENTER to display the setup results in detail. 7 Press Dl / h repeatedly to toggle between the setup result displays. Results of the speaker connection and wiring Results of the speaker distance from the listening position Results of the speaker size p p 9 Make sure the pointer is pointing at "SET" and "CANCEL" and then press Dl / h to select "SET" or "CANCEL". Choices: SET, CANCEL • Select "SET" to confirm the "AUTO SETUP" results. • Select "CANCEL" to cancel the "AUTO SETUP" results. 10 Press DENTER to confirm your selection. The top "SET MENU" display appears in the OSD. SET MENU TOP MENU . ;AUTO SETUP ;MANUAL SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter Results of the speaker output level y If you are not satisfied with the results or want to manually adjust each parameter, run "MANUAL SETUP" (see page 49). Note The distances displayed in the "DISTANCE" results may be longer than the actual distance depending on the characteristics of your speakers. 11 Press NSET MENU to exit from "SET MENU". 12 Disconnect the optimizer microphone from this unit. The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit. y If you change speakers, speaker positions, or the layout of your listening environment, run "AUTO SETUP" again to recalibrate your system. 8 Press DENTER to return to the "AUTO:RESULT" display. AUTO:RESULT NO WARNING RESULT SP : 3/2/0.1 DIST: 3.2/3.5m LVL : -2/+2dB . >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter 24 En