Yamaha RX-V461 Owner's Manual - Page 60

SET MENU ■ Input rename B)INPUT RENAME Use this feature to change the name of the input source that appears in the OSD and in the front panel display. 2 INPUT MENU B)INPUT RENAME DVD -> DVD [p]/[[]:Position [ ]/[ ]:Chara. ■ Volume trim C)VOLUME TRIM Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, DOCK, MULTI CH IN, XM Control range: -6.0 to +6.0 dB Control step: 1.0 dB Initial setting: 0.0 dB p p p p 1 Press one of the input selector buttons (A) to select the input source you want to change the name of. 2 INPUT MENU C)VOLUME TRIM DVD DVD ;;;;;;0.0dB MD MULTI CH IN CD CD-R DVD CBL DTV TUNER XM DOCK V-AUX DVR 2 Set the operation mode selector (K) to AMP and then press Dl / h on the remote control to place the "_" (underscore) under the space or the character you want to edit. 3 Press Dk / n to select the character you want to use and then press Dl / h to move to the next space. [p]/[[]:Adjust [RETURN]:Exit Note You can only adjust the value for DOCK when your iPod is stationed in the Yamaha Universal Dock connected to this unit. ■ Decoder mode D)DECODER MODE 2 INPUT MENU D)DECODER MODE . >AUTO LAST CD ;;;;AUTO DVD ;;;;AUTO DTV/CBL ;;;;AUTO [ ]/[ ]:Up/Down [p]/[[]:Select Notes • You can use up to 8 characters for each input. • Press Dn to change the character in the following order, or press Dk to go in the reverse order: A to Z, a space, 0 to 9, a space, a to z, a space, symbols etc.) 4 Repeat steps 1 through 3 to rename each input source. 5 Press DENTER to exit from "INPUT RENAME". Decoder select mode Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choices: AUTO, LAST • Select "AUTO" if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode. • Select "LAST" if you want this unit to automatically select the last decoder mode used the connected input source. DTS decoder prioritize setting Choices: AUTO, DTS • Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode. • Select "DTS" when you play back a DTS-CD. 56 En