Yamaha RX-V461 Owner's Manual - Page 58
Center speaker equalizer, Low-frequency effect level, Dynamic range, Audio settings, Test tone
UPC - 027108927671
View all Yamaha RX-V461 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
SET MENU ■ Center speaker equalizer D)CENTER GEQ Use this feature to adjust the built-in 5-frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. You can make adjustments while listening to the currently selected source component or a test tone. Control range: -6.0 to +6.0 dB Control step: 0.5 dB Initial setting: 0 dB ■ Dynamic range F)D. RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals. 1 SOUND MENU F)D. RANGE . SP D.R;;;;MAX SP D.R;;;;MAX p p 1 SOUND MENU D)CENTER GEQ TEST >OFF ON . 100Hz ;;;;;; 0.0dB 300Hz ;;;;;; 0.0dB 1kHz ;;;;;; 0.0dB 3kHz ;;;;;; 0.0dB 10kHz ;;;;;; 0.0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust Test tone TEST Use this feature to make adjustments for "CENTER GEQ" while listening to a test tone. Choices: OFF, ON • Select "OFF" to stop test tones and output the currently selected source component. • Select "ON" to output test tones from the center and front left speakers. ■ Low-frequency effect level E)LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: -20 to 0 dB Control step: 1 dB p p p p [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker SP Adjusts the speaker compression. Headphone HP Adjusts the headphone compression. Choices: MIN, STD, MAX • Select "MIN" (minimum) if you regularly listen at low volume levels. • Select "STD" (standard) for general use. • Select "MAX" (maximum) to preserve the greatest amount of dynamic range. ■ Audio settings G)AUDIO SET Use this feature to adjust the overall audio settings of this unit. 1 SOUND MENU G)AUDIO SET . MUTE TYPE;;;FULL A.DELAY;;;;;;0ms MAX VOL.;;;+16dB INI.VOL.;;;;;OFF [ ]/[ ]:Up/Down [p]/[[]:Adjust p p 1 SOUND MENU E)LFE LEVEL . SPEAKER;;;;;;0dB HEADPHONE;;;;0dB [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker SPEAKER Adjusts the speaker LFE level. Headphone HEADPHONE Adjusts the headphone LFE level. Note Depending on the settings of "LFE/BASS OUT" (see page 52), some signals may not be output at the SUBWOOFER OUTPUT jack. Mute type MUTE TYPE Use this feature to adjust how much the mute function reduces the output volume (see page 34). Choices: FULL, -20dB • Select "FULL" to completely mute all the audio output. • Select "-20dB" to reduce the current volume by 20 dB. Audio delay A.DELAY Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors. Control range: 0 to 160 ms Control step: 1 ms 54 En