Yamaha RX-V461 Owner's Manual - Page 33

BASIC OPERATION Selecting the SCENE templates Creating your original SCENE templates You can create your original SCENE templates for each SCENE button. You can refer to the preset 16 SCENE templates to create the original SCENE templates. ■ Customizing the preset SCENE templates Use this feature to customize the preset SCENE templates. Select a SCENE template Create the original SCENE template SCENE template library (Image) 1 Assign to the SCENE button 1 Turn on the video monitor connected to this unit. 2 Set the operation mode selector (K) to AMP and then press and hold the desired FSCENE button for 3 seconds. The SCENE template customizing screen appears on the video monitor. AMP SOURCE TV 1 3 seconds 3 Press Dk / n to select the desired parameter of the SCENE template and then Dl / h to select the desired value of the selected parameter. You can adjust the following parameters for a SCENE template: • INPUT: The input source component • MODE: The active sound field programs, STRAIGHT or DIRECT STEREO mode (see pages 33 and 36) • NIGHT: The night listening mode setting (see page 33) − SYSTEM: Keeps the current night listening mode. − CINEMA: Sets the night listening mode to the CINEMA mode. − MUSIC: Sets the night listening mode to the MUSIC mode. 4 Press the FSCENE button again to confirm the edit. 1 y An asterisk mark (*) appears by the name of the original SCENE template. Notes • Once the desired SCENE templates are assigned to the corresponding FSCENE buttons, you may need to set the input source of the SCENE template on the remote control. See page 59 for details. • You can create a customized SCENE template for each FSCENE button, and if you create another customized SCENE template, this unit overwrites the old customized SCENE template with the new one. • The newly created template is only available for the assigned FSCENE button. ■ Renaming the SCENE templates Note When the SCENE template you want to customize is not assigned to any of the FSCENE button, press Dl / h repeatedly to recall the desired SCENE template on the menu screen. Select "SCENE" in step 3 of "Customizing the preset SCENE templates" and then press D ENTER. • Press Dk / n to select the desired character. • Press Dl / h to place "_" (underscore) under the space or the desired character. • Press ERETURN to cancel the new name. • Press DENTER to confirm the new name. English 29 En