Yamaha RX-V461 Owner's Manual - Page 41
Editing sound fields parameters
UPC - 027108927671
View all Yamaha RX-V461 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
■ Editing sound fields parameters You can enjoy good quality sound with the factory preset parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. 1 While listening to a source, set the operation mode selector (K) to AMP and then press Dk / n to select the desired parameter. 2 Press Dl / h to change the parameter value. Note You cannot change parameter values when "MEMORY GUARD" in "OPTION MENU" is set to "ON" (see page 58). Sound field programs y Initial settings are indicated in bold under each parameter. For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic: DSP level DSP LEVEL Function: Choices: Adjusts the effect level. MIN, MID, MAX For PRO LOGIC II Music: Panorama PANORAMA Function: Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. Choices: OFF, ON Dimension DIMENSION Function: Gradually adjusts the sound field either towards the front or towards the rear. Control range: -3 (towards the rear) to +3 (towards the front), initial setting is STD (standard). Center width CT WIDTH Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the center image towards the front left and right speakers. Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from front left and right speakers), initial setting is 3. For Music Enh. 2ch and Music Enh. 5ch Effect level Function: Choices: Adjusts the effect level. LOW, HIGH BASIC OPERATION English 37 En