Yamaha RX-V461 Owner's Manual - Page 40
SILENT CINEMA, sound field programs with headphones
UPC - 027108927671
View all Yamaha RX-V461 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Sound field programs ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Set the operation mode selector (K) to AMP and then press QSUR. DECODE repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference. STANDARD PRO LOGIC PLII Movie PLII Music PLII Game Neural Functions Dolby Pro Logic processing for any sources Dolby Pro Logic II processing for movie sources Dolby Pro Logic II processing for music sources Dolby Pro Logic II processing for game sources Neural Surround processing for any sources ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers. If you set "SUR. L/R SP" to "NONE" (see page 52), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP or HiFi DSP program (see page 35). Note Virtual CINEMA DSP will not activate even when "SUR. L/R SP" is set to "NONE" (see page 52) in the following cases: - When "5ch Stereo" (see page 35) is selected. - When headphones are connected to the PHONES jack. ■ Enjoying multi-channel sources and sound field programs with headphones (SILENT CINEMA) SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 35). When activated, the SILENT CINEMA indicator lights up in the front panel display. Note SILENT CINEMA does not activate when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 31). ■ Enjoying unprocessed input sources (Straight decoding mode) When this unit is in the "STRAIGHT" mode, multichannel sources are decoded straight into the appropriate channels without any additional effect processing. 2channel stereo sources are output from only the front left and right speakers. Press BSTRAIGHT (or set the operation mode selector (K) to AMP and then press SSTRAIGHT) to select "STRAIGHT". To deactivate the "STRAIGHT" mode, press BSTRAIGHT (or SSTRAIGHT) again so that "STRAIGHT" disappears from the front panel display. 36 En