Yamaha RX-V595aRDS Owner's Manual - Page 14
Connecting To S Video Terminals, On The Front Panel, Connecting With A Monitor Tv
View all Yamaha RX-V595aRDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONNECTING TO S VIDEO TERMINALS If you have a VCR and a monitor equipped with "S" (highresolution) video terminals, those terminals can be connected to this unit's S VIDEO terminals. Connect the VCR's "S" video input and output terminals to this unit's S VIDEO VCR OUT and IN terminals, respectively, and connect the monitor's "S" video input terminal to this unit's S VIDEO MONITOR OUT terminal. Otherwise, connect the VCR's composite video terminals to this unit's composite video terminals, and connect the monitor's composite video input terminal to this unit's composite MONITOR OUT terminal. In addition, if you have a DVD or LD player equipped with an "S" video terminal, connect the DVD/LD player's "S" video output terminal to this unit's S VIDEO DVD/LD terminal. Note If video signals are sent to both S VIDEO input and composite input terminals, the signals will be sent to their respective output terminals. S VIDEO terminals This unit provides you with S VIDEO terminals in addition to standard VIDEO terminals. S VIDEO terminals transmit video signals separated into luminance (Y) signals and color (C) signals. In comparison with S VIDEO terminals, standard VIDEO terminals transmit "composite" video signals. S VCR SS S S DVD/LD player S VIDEO cable Monitor TV CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) These terminals are used to connect any video input source such as a camcorder to this unit. CONNECTING WITH A MONITOR TV THAT USES A 21-PIN CONNECTOR FOR INPUT Make a connection as shown below with a commercially available SCART-plug connector cable. S No connection S Camcorder Monitor TV SCART-plug connector cable 14