Yamaha RX-V595aRDS Owner's Manual - Page 23

TIME/LEVEL, Notes, VOLUME, on the remote control.

Get Yamaha RX-V595aRDS PDF manuals and user guides View all Yamaha RX-V595aRDS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

English 8 Adjust the sound output levels of the center speaker and the rear speakers so that they become almost the same as that of the main speakers. Press TIME/LEVEL once or more to select the speaker to be adjusted so that "CENTER", "R SUR." or "L SUR." appears on the display. Remote control * You cannot adjust the delay time while the test tone is sounding even if "DELAY" appears on the display after pressing TIME/LEVEL once or more. Adjust the level. * Pressing raises and lowers the level. * While adjusting, the test tone is heard from the selected speaker. Remote control Notes • Once you have completed these adjustments, you can only adjust the overall sound level of your audio system by using VOLUME (or VOLUME ( ) on the remote control). • If you use external power amplifiers, you may also use their volume controls to achieve the proper balance. • If the function "CNTR" in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 8. The center sound is automati- cally output from the left and right main speakers. • If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting "M.LVL" to "-10 dB". 9 When the adjustment is finished, press TEST again to stop the test tone. Remote control 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
23
English
8
Adjust the sound output levels of the center speaker
and the rear speakers so that they become almost the
same as that of the main speakers.
Press
TIME/LEVEL
once or more to select the speaker
to be adjusted so that “CENTER”, “R SUR.” or “L SUR.”
appears on the display.
Remote control
*
You cannot adjust the delay time while the test tone is
sounding
even if “DELAY” appears on the display
after pressing
TIME/LEVEL
once or more.
Adjust the level.
* Pressing
raises and
lowers the level.
*
While adjusting, the test tone is heard from the
selected speaker.
Remote control
9
When the adjustment is finished, press
TEST
again to
stop the test tone.
Remote control
Notes
•
Once you have completed these adjustments, you can only
adjust the overall sound level of your audio system by using
VOLUME
(or
VOLUME
(
) on the remote control).
•
If you use external power amplifiers, you may also use their
volume controls to achieve the proper balance.
•
If the function “CNTR” in the SET MENU mode is set to the
NONE position, the sound output level of the center speaker
cannot be adjusted in step 8.
The center sound is automati-
cally output from the left and right main speakers.
•
If there is insufficient sound output from the center and rear
speakers, you may decrease the main speaker output level
by setting “M.LVL” to “–10 dB”.