Yamaha RX-V595aRDS Owner's Manual - Page 45
AMP/TUN, includes the Dolby Pro Logic decoder, the Dolby Digital
View all Yamaha RX-V595aRDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
English The lightly marked buttons do not function. s AMP/TUN 1 Indicator window: Displays the names of components which can be controlled. 2 3 4 5 6 7 8 9 TV POWER 0 q s DSP Note: TV POWER and TV VOLUME function if you have preset the code for your TV. w Indicator: Flashes in red when the button is pressed. SELECTOR DIAL: Selects the position for the component to be controlled. e r TV VOLUME t y 1 POWER This button turns the unit on. 2 INPUT Press one of these buttons to select the required input source. 3 EXT. DEC. Press this button when using an external decoder. 4 A/B/C/D/E Press this button to select a group of preset stations. 5 DSP Press this button. While the indicator is lit up for about three seconds, select a DSP program by using the number buttons (1 to 8). No DSP program can be selected after the indicator goes off. 6 PRESET (+/-) Press these buttons to select the preset station number. 7 VOLUME ( ) Press these buttons to adjust the volume level. 8 MUTE Press this button to mute the sound. To cancel mute, press this button once more, or press the operation buttons of this unit. 9 SLEEP Press this button to set the SLEEP timer. 0 (LEFT), (RIGHT) These buttons are used to adjust the settings of the SET MENU mode and the TIME/LEVEL mode. q TIME/LEVEL Press this button to set the unit in the TIME/LEVEL mode and to select the item. w STANDBY Press this button to set this unit in the standby mode. e TEST Press this button to output a test tone for adjusting the output level of the speakers. r EFCT (EFFECT) ON/OFF Press this button to turn on or off the DSP program which includes the Dolby Pro Logic decoder, the Dolby Digital decoder and the DTS decoder. t (NEXT), (BACK) These buttons are used to advance or go back one selection in the SET MENU mode and TIME/LEVEL mode. y SET MENU Press this button to set the unit in the SET MENU mode and to select functions. 2 DSP program Press one of these buttons to select the required DSP program (1 to 8). When you select the input source, set the SELECTOR 2 DIAL to the AMP/TUN position. Note: The function of all buttons other than DSP program is the same as that with the AMP/TUN position. 45