Yamaha RXV465 Owner's Manual - Page 36

Using Bluetooth™ components You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform "Pairing" the connected Bluetooth wireless audio receiver and your Bluetooth component in advance. Note • This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile. Pairing the Bluetooth™ wireless audio receiver and your Bluetooth component "Pairing" refers to the operation of registering a Bluetooth component for Bluetooth communications. Pairing must be performed when using a Bluetooth component with the Bluetooth wireless audio receiver connected to this unit for the first time or if the pairing data has been deleted. y • You only need the pairing operation for the first time that you use the Bluetooth component with the Bluetooth wireless audio receiver. • Pairing requires operations on this unit and on the other component with which Bluetooth communications are to be established. If necessary, refer to the other component's operating instructions. ■ Pairing the Bluetooth™ wireless audio receiver and your Bluetooth™ component To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting. 1 Change the input source to "DOCK" using NINPUT l / h (or gDOCK). 2 Turn on the Bluetooth component you want to pair with and set it to pairing mode. For details on operation of the Bluetooth component, refer to its operating instructions. 3 Press mOPTION. The option menu for DOCK input appears on the front panel display. 4 Press nCursor n to select "Pairing" and press nENTER. "Searching" appears on the front panel display and the pairing operation starts. y • To cancel pairing, press nRETURN. • You can also start pairing operation by pressing and holding DMEMORY on the front panel. 5 Make sure the Bluetooth component recognizes the Bluetooth wireless audio receiver. If the Bluetooth have recognized the Bluetooth wireless audio receiver, "YBA-10 YAMAHA," for instance, is displayed in the Bluetooth device list. 6 Select the Bluetooth wireless audio receiver from the Bluetooth device list, and enter a path key "0000" into the Bluetooth component. When pairing is complete, "Completed" appears on the front panel display. y • The Yamaha Bluetooth wireless audio receiver can be paired with up to eight Bluetooth components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for the least recently used other component is cleared. Playback of the Bluetooth™ component 1 Change the input source to "DOCK" using NINPUT l / h (or gDOCK). 2 Press mOPTION. 3 Press nCursor n repeatedly to select "Connect" and press nENTER. After you execute "Connect," communication with the Bluetooth component is established. When the connected Bluetooth wireless audio receiver recognizes the Bluetooth component, "BT Connected" appears on the front panel display. y • When you press nENTER on the remote control, the connected Bluetooth wireless audio receiver searches and connects to the last connected Bluetooth component. If the Bluetooth wireless audio receiver cannot find the Bluetooth component, "Not found" appears on the front panel display. • To disconnect the Bluetooth wireless audio receiver from the Bluetooth component, display the option menu again, select "Disconnect," and press nENTER. 4 Start playback of the Bluetooth component. 32 En